Virtual-Expo logo

Analyzers catalogue - Anritsu - #57

/ 655


catalogue search
P. 51
P. 52
P. 53
P. 54
P. 55
P. 56
P. 57
P. 58
P. 59
P. 60
P. 61
P. 62
P. 63
P. 64
P. 65
P. 66
P. 67
P. 68
P. 69
P. 70
P. 71
P. 72
P. 73
P. 74
P. 75
P. 76
P. 77
P. 78
P. 79
P. 80
P. 81
P. 82
P. 83
P. 84
P. 85
P. 86
P. 87
P. 88
P. 89
P. 90
P. 91
P. 92
P. 93
P. 94
P. 95
P. 96
P. 97
P. 98
P. 99
P. 100


See other catalogues for Anritsu
You may also be interested in

X-ray inspection machine, Wireless network, Portable measuring device, Laser, Fault tester

Text version of the page
OPTICAL MEASURING INSTRUMENTS
/inritsu
Specifications
• MT9812B Multi Channel Box
Plug-in units*1
9 max.
Display
7 segments LED, 7 digits (sign: 1 digit, numerical value: 6 digits)
Remote control
GPIB, RS-232C
Laser safety mechanism
Remote inter-lock, optical output control (key control)
Environmental conditions
Operating temperature/humidity*2: 0 to +40'C/<90% (no condensation) Storage temperature: -30 to +7l'C
Power
85 to 132/170 to 250 Vac, 47.5 to 63 Hz, <250 VA
Dimensions and mass
426 (W) x 133 (H) x 451 (D) mm, <9 kg (without units)
EMC
EN61326: 1997/A2: 2001 (Class A) EN61000-3-2: 2000 (Class A) EN61326: 1997/A2: 2001 (Annex A)
LVD
EN61010-1: 2001 (Pollution Degree 2)
*1: Only one MU951001A can be Installed Into MT9812B
*2: Narrowest temperature range of the plug-In units or MT9812B
• DFB-LD light sources
Model
MU952501A/952502A/952503A/952504A/952505A
MU952601A/952602A/952603A/952604A/952605A/952606A
OptIcal element
DFB-LD
ApplIcable optIcal fIber
SM (ITU-T G.652)
Specified wavelength range (fp)*1
191.7 to 195.9 THz (1563.86 to 1530.33 nm)
186.3 to 191.6 THz (1609.19 to 1564.68 nm)
Center optical frequency*2
fp ±0.01 THz (approx. ±0.08 nm)
Spectrum half width*2
<30 MHz
Optical output power*2
+10 ±1 dBm
+7 ±1 dBm
Optical power stability
Time stability (short term)*2, *3, *4: <±0.005 dB Time stability (long term)*2, *3, *5: <±0.02 dB Temperature stability*2, *3, *6: <±0.25 dB
Time stability (short term)*2, *3, *4: <±0.01 dB
Time stability (long term)*2,*3,*5: <±0.02 dB
Temperature stability*2, *3, *6: <±0.25 dB
Center frequency stability
Time stability (short term)*2, *4: <±2 GHz (approx. ±0.02 nm) Time stability (long term)*2, *5: <±4 GHz (approx. ±0.04 nm)
Optical frequency tuning
Tuning range: fp ±60 GHz (approx. ±0.48 nm), Step: 1 GHz (approx. 0.01 nm) Accuracy*2: <±10 GHz (setting to fp + 60 GHz or fp - 60 GHz, 25'C)
Internal modulation
Frequency*2: 270 Hz, 1 kHz, 2 kHz ±0.1% Duty: 50% ±5%, Extinction ratio: >13 dB
Optical output attenuation
0.00 to 6.00 dB (0.01 dB steps), Accuracy: <±0.5 dB (at 25'C when set to 6.00 dB)
Laser safety mechanism
IEC60825-1: Class 3A, 21CFR1040.10: Class Illb
Optical connector
FC-PC, ST, DIN, HMS-10/A, SC*7
Warm-up time
1 h (after optical output on)
Environmental conditions
Operating temperature/humidity: +15 to +35'C/<90% (no condensation); Storage temperature: -25 to +71'C
Dimensions and mass
41 (W) x 78 (H) x 335 (D) mm, <700 g
Note: Wavelengths in vacuum
*1: Specify an optical frequency (wavelength) and model name from the ordering information.
*2: At CW, optical attenuation setting (0.00 dB), center optical frequency (fp) using SM fiber (ITU-T G.652) and FC-PC connector *3: When return loss seen from light source side is 40 dB min. *4: 5 min at constant temperature (at one point from +20 to +30'C) *5: 1 h at constant temperature *6: 8 h at +15 to +35'C
*7: Specified connector for optical connector option supplied as standard accessory. If connector not specified, FC (Option 37) supplied as standard.
• FP-LD light sources
Model
MU951301A
MU951501A
MU951001A*1
Optical element
FP-LD
Fiber
SM fiber (ITU-T G.652)
Wavelength*2
1310 ±20 nm
1550 ±20 nm
1310/1550 ±20 nm
Spectral half-width*2
<5 nm
<10 nm
<5 nm (1310 nm), <10 nm (1550 nm)
Optical output power*2
+7 ±1 dBm
Optical output power stability
Time stability (short term)*2, *3, *4: <±0.002 dB Time stability (long term)*2, *3, *5: <±0.02 dB Temperature stability*2, *3, *6: <±0.1 dB
Time stability (short term)*2, *3, *4: <±0.005 dB Time stability (long term)*2, *3, *5: <±0.05 dB Temperature stability*2, *3, *6: <±0.15 dB
Internal modulation
Frequency: 270 Hz, 1 kHz, 2 kHz ±0.1%, Duty: 50% ±5%, Extinction ratio: >13 dB
Optical output attenuation
0.00 to 6.00 dB (0.01 dB steps), Accuracy: <±0.5 dB (at 25'C when set to 6.00 dB)
Laser safety mechanism
IEC60825-1: Class 3A, 21CFR1040.10: Class Illb
Optical connector
FC-PC, ST, DIN, HMS-10/A, SC*7
Continued on next page
ittp://www.anritsu.com 54
DirectIndustry's Virtual Technical Library: PDF Catalogue | Technical Documentation | Brochure | Manual | Industrial directory | Specifications | Characteristics
pageCatalog pdf di En 2012-05-21-27