Analyzers catalogue - Anritsu - #529

/ 655


catalogue search
P. 501
P. 502
P. 503
P. 504
P. 505
P. 506
P. 507
P. 508
P. 509
P. 510
P. 511
P. 512
P. 513
P. 514
P. 515
P. 516
P. 517
P. 518
P. 519
P. 520
P. 521
P. 522
P. 523
P. 524
P. 525
P. 526
P. 527
P. 528
P. 529
P. 530
P. 531
P. 532
P. 533
P. 534
P. 535
P. 536
P. 537
P. 538
P. 539
P. 540
P. 541
P. 542
P. 543
P. 544
P. 545
P. 546
P. 547
P. 548
P. 549
P. 550


See other catalogues for Anritsu

Text version of the page

NETWORK ANALYZERS

Specifications

∗ 1

The following typical specifications apply at 23°±3°C. A warm-up time of 90 minutes should be allowed prior to verifying system specifications.For further specifications, reference the Scorpion VNMS Technical Specifications and Configuration Guide (part number 11410-00288).

Frequency range 10 MHz to 9 GHz
∗ 2 Damage levels 20 dBm, 25 V DC 9-Port Test Set 9 K(f) ports + 25 pin control I/O
General 18-Port Test Set 18 K(f) ports VNA interface 4 K(f) ports Test Set connectivity Full connectivity between DUT and VNA ports >16 dB, 10 MHz to 3 GHz
∗ 2 Raw return loss: DUT ports, ON state >12 dB, 3 to 6 GHz >10 dB, 6 to 9 GHz >20 dB, 10 MHz to 3 GHz
∗ 2 Raw return loss: DUT ports, OFF state >17 dB, 3 to 6 GHz >12 dB, 6 to 9 GHz >13 dB, 10 MHz to 3 GHz
∗ 2 Raw return loss: VNA ports >10 dB, 3 to 6 GHz >10 dB, 6 to 9 GHz
∗ 2 Insertion loss (any path) <2.5 dB, 10 MHz to 3 GHz <5 dB, 3 to 9 GHz
RF Performance Isolation (an on path to an off port, all unused ports terminated) >100 dB, 10 MHz to 6 GHz
∗ 2 >90 dB, 6 to 9 GHz Available power at the DUT ports (dependent on VNA and cables being used) MS4622D, (10 MHz to 3 GHz) MS4623D, (10 MHz to 6 GHz)MS4624D, (10 MHz to 9 GHz) +7 dBm (typically up to +10 dBm)+5 dBm (typically up to +8 dBm)+3 dBm (typically up to +6 dBm) When used with a Scorpion VNMS and an appropriate multi-port calibration is performed at the DUT plane, the following corrected parameters apply at 23º ±3ºC. R series cal kits assumed. A warm-up time of 90 minutes should be allowed prior to verifying system specifications. >43 dB 10 MHz to 3 GHz
∗ 2 Corrected Source Match >41 dB 3 to 6 GHz>36 dB 6 to 9 GHz >47 dB 10 MHz to 3 GHz
∗ 2 Corrected Directivity >43 dB 3 to 6 GHz >40 dB 6 to 9 GHz
Corrected Performance

∗

1:System consisting of MS462xD and SM5992 9-Port Test Set

∗

2:Due to DC blocks, some degradation may be observed between 10 and 100 MHz.

Ordering Information

Please specify model/order number, name, and quantity when ordering.

Model/Order No. NameMS4624D10 MHz – 9 GHz Balanced/Differential 4-PortSM5992RF Multiport Test Set, 9-Port

http://www.anritsu.com 526


pageCatalog pdf di En 2012-05-21-27