Analyzers catalogue - Anritsu - (Version JPG) - Page n° 52 - PDF Catalogue | Technical Documentation

See other catalogues for Anritsu

Portable measuring device, Diode, Dispersion analyzer, Antenna, Multiplexer

Text version of the page

OPTICAL MEASURING INSTRUMENTS

/inritsu


Model	MU931311A	MU931421A MU931422A
Linearity*⁶	±0.05 dB (+10 to 0 dBm) ±0.01 dB ±0.3 pW (0 to -90 dBm)	±0.05 dB (+10 to 0 dBm) ±0.01 dB ±30 pW (0 to -70 dBm)
Calibration factor input	-99.999 to +99.999 dB
Wavelength sensitivity correction	Measurement wavelength input in 0.01 nm units
Zero set operation	Automatic zero calibration
Range select	Auto, manual
Modulated light reception	CW/MOD selectable, MOD: 270 Hz, 1 kHz, 2 kHz
Measurement interval*⁷	1, 10, 20, 50, 100, 200, 500 ms, 1 s to 99 h 59 min 59 s
Average setting	Off, 2, 5, 10, 20, 50, 100, 200, 500, 1000 times
Analog output*⁸	Approx. +2 V
Bandwidth select*⁹	Auto, manual Manual setting: 0.1, 1, 10, 100 Hz, 1, 10, 100 kHz (CW mode only)	Auto, manual Manual setting: 0.1, 1, 10, 100 Hz, 1, 10 kHz (CW mode only)
Optical connector*¹⁰	FC-PC, ST, DIN, HMS-10/A, SC (all PC type) FC, ST, DIN, HMS-10/A, SC, MU, LC
Environmental conditions	Operating temperature/humidity: 0 to +50'C/<90% (no condensation), Storage temperature/humidity: —40 to +71'C/<95% (no condensation)
Dimensions and mass	41 (W) x 78 (H) x 335 (D) mm, <700 g	41 (W) x 78 (H) x 335 (D) mm, <550 g

*1 Wavelength: 1300 nm

*2 Measurement interval: 100 ms, average: 10 times, peak to peak noise, wavelength: 1300 nm *3 SM fiber (ITU-T G.652), return loss: >45 dB, wavelength: 1550 nm *4 Reference conditions

SM fiber (ITU-T G.652), master FC connector

Power level: 100 uW (-10 dBm), CW light, wavelength: 1300 nm, ambient temperature: 23' ±2'C, at day of calibration, Warm-up: 1 h (MU931311A) and 30 min (MU931421A/931422A) *5 Operating conditions

SM Fiber (ITU-T G.652), master FC connector, CW light, any wavelength in 1000 to 1600 nm (MU931311A) and 1000 to 1650 nm (MU931421A/931422A), power level: 100 uW (-10 dBm), ambient

temperature: 23' ±5'C, within 1 year after calibration, warm-up: 1 h (MU931311A) and 30 min (MU931421A/931422A), Uncertainty increase by 1% if either

an APC connector or NA <0.29 fiber is used with the MU931422A.

*6 Measurement conditions: Constant temperature within 23' ±5'C, bandwidth: auto/0.1/1/10 Hz, any wavelength in 1000 to 1600 nm (MU931311A) and 1000 to 1650 nm (MU931421A/931422A), CW light, power level: 100 uW (-10 dBm) reference, warm-up: 1 h (MU931311A) and 30 min (MU931421A/931422A) *7 Only record measurements for measurement interval of <100 ms *8 Full-scale value for each measurement range

*9 Approx. 3 dB bandwidth. Response time at bandwidth setting of 100 kHz varies according to analog output amplitude

*10 Specify connector for optical connector option supplied as standard accessory. If connector not specified, FC (Option 37) supplied as standard.

• Optical sensor (sensor head)


	Model	MU931002A + MA9332A/MA9333A
	Element	InGaAs-PD
	Input type	Fiber
	Applicable optical fiber	9/125 to 62.5/125 um (NA: <0.29), PC, APC polish conformity
	Wavelength range	750 to 1700 nm
	Optical power measurement range*¹	CW: +7 to -80 dBm
	Noise level*²	<-73 dBm
	Polarization dependency^*3	<±0.017 dB (MA9332A), <±0.013 dB (MA9333A)
	Optical power measurement accuracy	Reference conditions^4: ±2%, Operating conditions^5: ±3.5%
	Linearity^*6	±0.05 dB (+7 to 0 dBm), ±0.01 dB ±30 pW (0 to -70 dBm)
	Zero set operation	Automatic zero calibration
	Wavelength sensitivity correction	Measurement wavelength input in 0.01 nm units
	Measurement interval^*7	1 ms to 99 h 59 min 59 s
	Average setting	2 to 1000 times
	Analog output^*8	Approx. +2 V
	Bandwidth select*9	Auto, manual Manual setting: 1, 10, 100 Hz, 1, 20 kHz (CW mode only)
	Optical connector^*10	FC, ST, DIN, HMS-10/A, SC, MU, LC
	Environmental conditions	Operating temperature/humidity: 0 to +50'C/<90% (no condensation) Storage temperature/humidity: -40 to +71'C/<95% (no condensation)
	Dimensions and mass	MU931002A: 41 (W) x 78 (H) x 335 (D) mm, <500 g MA9332A/MA9333A: 65 (W) x 80 (H) x 110 (D) mm, <750 g

*1 Wavelength: 1550 nm

*2 Measurement Interval: 100 ms, average: 10 times, peak to peak noise, wavelength: 1550 nm

*3 SM fiber (ITU-T G.652), power level: 100 uW (-10 dBm), return loss: >45 dB, wavelength: 1550 nm

*4 Reference conditions

SM fiber (ITU-T G.652), master FC connector

Power level: 100 uW (-10 dBm), CW light, wavelength: 1550 nm, ambient temperature: 23' ±2'C At day of calibration, warm-up: 30 min, 1 h (when using MA9333A)

http://www.anritsu.com 49

Analyzers catalogue - Anritsu - #52

Portable measuring device, Diode, Dispersion analyzer, Antenna, Multiplexer