Virtual-Expo logo

Analyzers catalogue - Anritsu - #50

/ 655


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50


See other catalogues for Anritsu
You may also be interested in

Fiber optic test, Fault tester, Microscope, Attenuator, Power meter

Text version of the page
OPTICAL MEASURING INSTRUMENTS
/inritsu
• Light sources DFB-LD light source
Model
MU952501A/952502A/952503A/952504A/952505A
MU952601A/952602A/952603A/952604A/952605A/952606A
Optical element
DFB-LD
Applicable optical fiber
SM (ITU-T G.652)
Specified wavelength range (fp)*1
191.7 to 195.9 THz (1563.86 to 1530.33 nm)
186.3 to 191.6 THz (1609.19 to 1564.68 nm)
Center optical frequency*2
fp ±0.01 THz (approx. ±0.08 nm)
Spectrum half width*2
<30 MHz
Optical output power*2
+10 ±1 dBm
+7 ±1 dBm
Optical power stability
Time stability (short term)*2' *3' *4: <±0.005 dB Time stability (long term) 2' *3' *5: <±0.02 dB Temperature stability*2' *3' *6: <±0.25 dB
Time stability (short term)*2, *3 *4: £±0.01 dB Time stability (long term)*2, *3 *5: <±0.02 dB Temperature stability*2, *3 *6: <±0.25 dB
Center frequency stability
Time stability (short term) *2' *4: <±2 GHz (approx. ±0.02 nm) Time stability (long term) *2' *5: <±4 GHz (approx. ±0.04 nm)
Optical frequency tuning
Tuning range: fp ±60 GHz (approx. ±0.48 nm)' Step: 1 GHz (approx. 0.01 nm)' Accuracy*2: <±10 GHz (setting to fp +60 GHz. or fp -60 GHz. 25'C)
Internal modulation
Frequency*2: 270 Hz_ 1 kHz_ 2 kHz ±0.1% Duty: 50% ±5%' Extinction ratio: >13 dB
Optical output attenuation
0.00 to 6.00 dB (0.01 dB steps)' accuracy: <±0.5 dB (at 25'C when set to 6.00 dB)
Laser safety mechanism
IEC60825-1: Class 3A_ 21CFR1040.10: Class IIIb
Optical connector
FC-PC ST DIN' HMS-10/A' SC*7 (all PC type)
Warm-up time
1 h (after optical output on)
Environmental conditions
Operating temperature/humidity: +15 to +35'C/<90% (no condensation)' Storage temperature: -25 to +71'C
Dimensions and mass
41 (W) x 78 (H) x 335 (D) mm_ <700 g
Note: Wavelengths in vacuum 1: Specify an optical frequency (wavelength) and model name from the or­dering information.
2: At CW, optical attenuation setting (0.00 dB), center optical frequency (fp)
using SM fiber (ITU-T G.652) and FC-PC connector 3: When return loss seen from light source side is 40 dB min.
*4: 5 min at constant temperature (at one point +20 to +30'C)
5: 1 h at constant temperature *6: 8 h at +15 to +35'C
7: Specified connector for optical connector option supplied as standard acces­sory. If connector not specified, FC (Option 37) supplied as standard.
FP-LD light source
Model
MU951301A
MU951501A
MU951001A*1
Optical element
FP-LD
Fiber
SM (ITU-T G.652)
Wavelength*2
1310 ±20 nm
1550 ±20 nm
1310/1550 ±20 nm
Spectral half-width*2
<5 nm
<10 nm
<5 nm (1310 nm), <10 nm (1550 nm)
Optical output power*2
+7 ±1 dBm
Optical output power stability
Time stability (short term)*2' *3' *4: <±0.002 dB Time stability (long term)*2' *3' *5: <±0.02 dB Temperature stability*2' *3' *6: <±0.1 dB
Time stability (short term) 2, 3, 4: <±0.005 dB Time stability (long term) 2, 3, 5: <±0.05 dB
Temperature stability*2, *3 *6: <±0.15 dB
Internal modulation
Frequency: 270 Hz_ 1 kHz_ 2 kHz ±0.1%_ Duty: 50% ±5%_ Extinction ratio: >13 dB
Optical output attenuation
0.00 to 6.00 dB (0.01 dB steps)' Accuracy: <±0.5 dB (at 25'C when set to 6.00 dB)
Laser safety mechanism
IEC60825-1: Class 3A_ 21CFR1040.10: Class IIIb
Optical connector
FC-PC ST DIN' HMS-10/A' SC*7 (all PC type)
Warm-up time
1 h (after optical output on)
Environmental conditions
Operating temperature/humidity: 0 to +50'C/<90% (no condensation); Storage temperature: —40 to +71'C (no condensation)
Dimensions and mass
41 (W) x 78 (H) x 335 (D) mm_ <700 g
Note: Wavelengths in vacuum *4: 15 min at constant temperature (at one point from +20 to +30'C)
*1: Only one MU951001A can be installed into MT9812B. *5: 6 h at constant temperature
*2: At CW, optical attenuation setting (0.00 dB), using SM fiber (ITU-T G.652) *6: 8 h at 0 to +50'C
and FC-PC connector 7: Specified connector for optical connector option supplied as standard acces-
*3: When return loss seen from light source side is 40 dB min. sory. If connector not specified, FC (Option 37) supplied as standard.
SLD light source
Model
MU954501A
Optical element
SLD
Fiber
SM fiber (ITU-T G.652)
Wavelength 1
1550 ±20 nm
Spectral half-width 1
>40 nm
Optical output power 1
-3 ±1 dBm
Continued on next page
http://www.anritsu.com 47
DirectIndustry's Virtual Technical Library: PDF Catalogue | Technical Documentation | Brochure | Manual | Industrial directory | Specifications | Characteristics
pageCatalog pdf di En 2012-05-21-27