Text version of the page

SPECTRUMANALYZERS

?

Option 22: 75 Ω input (Option 12, 13, 19, and 20 cannot be installed simultaneously)

Frequency range100 kHz to 2.5 GHz Measurement range: Average noise level to +25 dBm (+133.8 dBµV)Level measurementMax. input level: +25 dBm (+133.8 dBµV, CW average power, RF ATT: ≥ 10 dB), ±100 VdcResidual response: ≤ –95 dBm (+13.8 dBµV, RF ATT: 0 dB, input: 75 Ω terminated, 1 MHz to 2.5 GHz) ±1.8 dB (100 kHz to 2.5 GHz, level measurement accuracy after calibration using internal calibration signal)Total level accuracyTotal level accuracy:Reference level accuracy (0 to –49.9 dBm) + frequency response + log linearity (0 to –20 dBm) + calibration signal source accuracy Setting rangeReference levelLog scale: +8.8 to +133.8 dBµV, Linear scale: 274 µV to 4.87 V Frequency response±1.0 dB (100 kHz to 2.5 GHz, referenced to 100 MHz, RF ATT: 10 dB, +18 to +28ËšC) Linearity (after calibration) Log scale: ±0.4 dB (0 to –20 dB, RBW: ≤ 1 MHz), ±1.0 dB (0 to –70 dB, RBW: ≤ 100 kHz), ±1.5 dB (0 to –85 dB, RBW: ≤ 3 kHz) Waveform displayLinear scale: ±4% (according to reference level) Marker level resolution Log scale: 0.01 dBLinear scale: 0.02% (according to reference level) 2nd harmonic distortion (MS2651B): ≤ –55 dBc (10 to 100 MHz, mixer input: –30 dBm) , ≤ –60 dBc (0.1 to 1.25 GHz, mixer input: –30 dBm)2nd harmonic distortion (MS2661B):
AmplitudeFunctions ≤ –60 dBc (10 to 200 MHz, mixer input: –30 dBm) , ≤ –75 dBc (0.2 to 1.25 GHz, band 0, mixer input: –30 dBm), Spurious response ≤ –80 dBc (0.8 to 1 GHz, mixer input: –30 dBm)Two signals 3rd order intermodulation distortion (MS2651B): ≤ –70 dBc (10 to 2.5 GHz)

∗

Frequency difference of two signals: ≥ 50 kHz, mixer input: –30 dBmTwo signals 3rd order intermodulation distortion (MS2661B): ≤ –70 dBc (10 to 100 MHz), ≤ –80 dBc (0.1 to 2.5 GHz)

∗

Frequency difference of two signals: ≥ 50 kHz, mixer input: –30 dBm 1 dB gain compression level to average noise level (MS2651B): >105 dB (0.1 to 1 GHz), >105 dB – f [GHz] dB (>1 GHz)1 dB gain compression level to average noise level (MS2661B): >110 dB (0.1 to 1 GHz), >110 dB – f [GHz] dB (>1 GHz), >109 dB (0.1 to 1 GHz, with Option 08),>109 dB – 1.5f [GHz] dB (>1 GHz with Option 08) Distortion characteristics (MS2651B RBW: 1 kHz) Max. dynamic range2nd harmonic:>67.5 dB (10 to 100 MHz), >70 dB (100 to 500 MHz) , >70 – f [GHz] dB (0.5 to 1.25 GHz)3rd order intermodulation:>76.6 dB (0.1 to 1 GHz), >76.6 dB – (2/3)f [GHz] dB (1 to 2.5 GHz)Distortion characteristics (MS2661B RBW: 1 kHz) 2nd harmonic:>72.5 dB (10 to 200 MHz), >80 dB (200 to 500 MHz) , >80 – f [GHz] dB (0.5 to 1.25 GHz),>82.5– f [GHz] dB (0.8 to 1 GHz)3rd order intermodulation:>80 dB (10 to 100 MHz), >83.3 dB (0.1 to 1 GHz), >83.3 dB – (2/3)f [GHz] dB (1 to 2.5 GHz) Input connectorNC-J, 75 Ω VIDEO OUTPUT (Y):Auxiliary I/O0 to 0.5 V ±0.1 V (typical, from lower edge to upper edge at 10 dB/div, 100 MHz, 75 Ω terminated)0 to 0.4 V ±0.1 V (typical, from lower edge to upper edge at 10%/div, 100 MHz, 75 Ω terminated), BNC connector

?

Option 23: 75 Ω tracking generator (Option 12, 13, 19, and 20 cannot be installed simultaneously)

Frequency range100 kHz to 2.5 GHz Output level range+44 to +104 dBµV (setting resolution: 0.1 dB) Output level accuracy ≤ ±1.5 dB (100 MHz, output level: +104 dBµV) Output level flatness ≤ ±1.75 dB (100 kHz to 2.5 GHz, output level: +104 dBµV, referenced to 100 MHz) Output level linearity ≤ ±1.0 dB (+74 to +104 dBµV), ≤ ±2.0 dB (+44 to +74 dBµV)

∗

100 kHz to 2.5 GHz, referenced to +104 dBµV SpuriousHarmonics: ≤ –20 dBc (100 kHz to 2.5 GHz)Non-harmonics: ≤ –30 dBc (100 kHz to 2.5 GHz) Tracking generator ≤ 13.8 dBµV (spectrum analyzer input and tracking generator output connectors terminated at 75 Ω )feed through Output connectorNC-J, 75 Ω

?

Option 24: Television monitor (Brazil)

VideoM-NTSC, M PAL, color AudioSimultaneous monitoring of video and audio

∗

Needs Option 07 Channel: Automatic setting to broadcast wave of CCIR, Japan and USA; automatic setting to CATV of CCIR, Japan and USA FunctionsTrigger: Triggered sweep by V-SYNC, H-SYNC

∗

Needs trigger/gate circuit (Option 06)Aux. output: Composite video signal, Connector: BNC

http://www.anritsu.com 494