Text version of the page

SPECTRUMANALYZERS

Measurement range: Average noise level to +30 dBm Maximum input level: +30 dBm (CW average power, RF ATT: ≥ 10 dB), ±0 Vdc Average noise level: [Without Option 08] ≤ –115 dBm (1 MHz to 1 GHz, band 0), ≤ –115 dBm + 1.5f [GHz] dB (1 to 3.1 GHz, band 0),Level measurement ≤ –115 dBm + 0.5f [GHz] dB (2.92 to 8.1 GHz, band 1)

∗

RBW: 1 kHz, VBW: 1 Hz, RF ATT: 0 dB[With Option 08, pre-amplifier: off] ≤ 114 dBm (1 MHz to 1 GHz, Band 0), ≤ –114 dBm + 1.5 x f [GHz] dB (1 to 3.1 GHz, Band 0), –115 dBm + 0.5 x f [GHz] dB (2.92 to 8.1 GHz, Band 1)Residual response: ≤ –100 dBm (RF ATT: 0 dB, input: 50 Ω termination, 1 MHz to 8.1 GHz) ±1.3 dB (100 kHz to 3.1 GHz band 0), ±2.3 dB (2.92 to 8.1 GHz, band 1)

∗

Level measurement accuracy after calibration using internal calibration signalTotal level accuracyTotal level accuracy:Reference level accuracy (0 to –49.9 dBm) + frequency response + log linearity (0 to –20 dB) + calibrated signal source accuracy Setting rangeLog scale: –100 to +30 dBm; Linear scale: 224 µV to 7.07 VUnitLog scale: dBm, dBµV, dBmV, V, dBµVemf, W, dBµV/m Linear scale: VReference level accuracy:Reference level±0.4 dB (–49.9 to 0 dBm), ±0.75 dB (–69.9 to –50 dBm, 0.1 to +30 dBm), ±1.5 dB (–80 to –70 dBm)

∗

After calibration, at 100 MHz, span: 1 MHz (when RF ATT, RBW, VBW and sweep time set to AUTO)RBW switching uncertainty: ±0.3 dB (1 kHz to 1 MHz), ±0.4 dB (3 MHz)

∗

After calibration, referenced to RBW: 3 kHzInput attenuator (RF ATT)Setting range: 0 to 70 dB (10 dB steps)

∗

Manually settable, or automatically settable according to reference levelAccuracy:±0.3 dB (0 to 50 dB), ±1.0 dB (0 to 70 dB)

∗

After calibration, frequency: 100 MHz, referenced to RF ATT: 10 dB ±0.5 dB (100 kHz to 3.2 GHz, band 0, referenced to 100 MHz, RF ATT: 10 dB, +18 to +28ËšC) ±1.5 dB (9 to 100 kHz, band 0, referenced to 100 MHz, RF ATT: 10 dB, +18 to +28ËšC)Frequency response±1.5 dB (2.92 to 8.1 GHz, band 1, referenced to 100 MHz, RF ATT: 10 dB, +18 to +28ËšC)±1.0 dB (100 kHz to 3.2 GHz, band 0, RF ATT: 10 to 50 dB)±3.0 dB (2.92 to 8.1 GHz, band 1, RF ATT: 10 to 50 dB)
Amplitude

∗

At band 1, after pre-selector tuning Scale (10 div)Log scale: 10, 5, 2, 1 dB/divLinear scale: 10, 5, 2, 1%/divLinearity (after calibration)Waveform displayLog scale:±0.4 dB (0 to –20 dB, RBW: ≤ 1 MHz), ±1.0 dB (0 to –70 dB, RBW: ≤ 100 kHz), ±1.5 dB (0 to –85 dB, RBW: ≤ 3 kHz), ±2.5 dB (0 to –90 dB, RBW: ≤ 3 kHz)Linear scale: ±4% (compared to reference level)Marker level resolutionLog scale: 0.01 dB, Linear scale: 0.02% of reference level 2nd harmonic distortion: ≤ –60 dBc (10 to 200 MHz, band 0, mixer input: –30 dBm), ≤ –75 dBc (0.2 to 1.3 GHz, band 0, mixer input: –30 dBm), ≤ –70 dBc (1.3 to 1.55 GHz, band 0, mixer input: –30 dBm), ≤ –80 dBc (0.8 to 1 GHz, band 0, mixer input: –30 dBm),Spurious response ≤ –100 dBc (1.46 to 4.05 GHz, band 1, mixer input: –20 dBm)Two signals 3rd order intermodulation distortion: ≤ –70 dBc (10 to 100 MHz), ≤ –80 dBc (0.1 to 8.1 GHz)

∗

Frequency difference of two signals: ≥ 50 kHz, mixer input: –30 dBmImage response: ≤ –70 dBc, Multiple response: ≤ –70 dBc (band 1) 1 dB gain compression ≥ –5 dBm ( ≥ 100 MHz, at mixer input level) 1 dB gain compression level to average noise level:>110 dB (0.1 to 1 GHz, band 0), >110 dB – 1.5f [GHz] dB (1 to 3.1 GHz, band 0), >110 dB – 0.5f [GHz] dB (2.92 to 8.1 GHz, band 1)Distortion characteristics (RBW: 1 kHz)Maximum dynamic range2nd harmonic:>72.5 dB (10 to 200 MHz), >80 dB (200 to 500 MHz), >80 – 0.75f [GHz] dB (0.5 to 1.3 GHz), >82.5– 0.75f [GHz] dB (0.8 to 1 GHz), >77.5 – 0.75f [GHz] dB (1.3 to 1.55 GHz, band 0), >97.5– 0.25f [GHz] dB (1.46 to 4.05 GHz, band 1)3rd order intermodulation:>80 dB (10 to 100 MHz), >83.3 dB (0.1 to 1 GHz), >83.3 – f [GHz] dB (1 to 3.1 GHz, band 0), >83.3– (1/3)f [GHz] dB (2.92 to 8.1 GHz, band 1) Setting range : 20 ms to 1000 s (manually settable, or automatically settable according to span, RBW, and VBW)Sweep timeAccuracy: ±15% (20 ms to 100 s), ±45% (110 to 1000 s), ±1% (time domain sweep: digital zero span mode) Sweep modeContinuous, single Time domain sweep modeAnalog zero span, digital zero span Zone sweepSweep only in frequency range indicated by zone marker Tracking sweepSweeps while tracing peak points within zone marker (zone sweep also possible) Number of data points501 NORMAL: Simultaneously displays max. and min. points between sample pointsPOS PEAK: Displays max. point between sample pointsDetection modeNEG PEAK: Displays min. point between sample pointsSAMPLE: Displays momentary value at sample points Detection mode switching uncertainty: ±0.5 dB (at reference level)
FunctionsSweep DisplayColor TFT-LCD, Size: 5.5 inch; Number of colors: 17 (RGB, each 64-scale settable); Intensity adjustment: 5 steps settable Continued on next page

http://www.anritsu.com 476