Text version of the page

SPECTRUMANALYZERS

SPECTRUM ANALYZER

GPIB

MS2663C

9 kHz to 8.1 GHz

For Measuring up to 3rd Order Spurious Frequencies in the Mobile Communications Band

6

The MS2663C covers a frequency range of 9 kHz to 8.1 GHz. Thisallows measurement of spurious frequencies of up to three times greater than the frequency bands used worldwide for mobile com- munications. The MS2663C has superior basic performance such as high C/N ratio, low distortion, and high frequency/level accuracies and is easy to operate. The MS2663C has a “Measure” function for evaluation of radio equip-ment (frequency counter, C/N, adjacent channel power, occupied fre- quency bandwidth, burst average power, and template decision func- tion), which enables the two screen display and FM demodulation waveform display. The large selection of options means that a wider range of applications can be handled at a reasonable cost.

Specifications

Except where noted otherwise, specified values are obtained after warming up the equipment for 30 minutes at a constant ambient tempera-ture and then performing calibration. The typical values are given for reference and are not guaranteed.

Frequency range9 kHz to 8.1 GHz Frequency bandBand 0 (0 to 3.2 GHz); Band 1 – (2.92 to 6.5 GHz); Band 1 + (6.4 to 8.1 GHz) Pre-selector range2.92 to 8.1 GHz (band 1–, 1+) Display frequency±(display frequency x reference frequency accuracy + span x span accuracy + 100 Hz) accuracy

∗

Span: ≥ 10 kHz, after calibration Marker frequencyNormal: Same as display frequency accuracy; Delta: Same as frequency span accuracydisplay accuracy Frequency counterResolution: 1 Hz, 10 Hz, 100 Hz, 1 kHz Accuracy: Display frequency x reference frequency accuracy ±1 LSD (at S/N: ≥ 20 dB) Setting range: 0 Hz, 1 kHz to 8.2 GHz Frequency spanAccuracy: ±2.5% (span: ≥ 10 kHz), ±5% (span: <10 kHz, Option 02 installed) Setting range:1 kHz, 3 kHz, 10 kHz, 30 kHz, 100 kHz, 300 kHz, 1 MHz, 3 MHz (manually settable, or automatically settable according to
Frequency Resolution bandwidth (RBW) frequency span)

∗

Option 02: 30 Hz, 100 Hz, and 300 Hz are added.(3 dB bandwidth)Measurements of noise, C/N, adjacent channel power, and channel power by measure function are executed with the calculated equivalent noise bandwidth of the RBW. Bandwidth accuracy: ±20% (1 kHz to 1 MHz), ±30% (3 MHz) Selectivity (60 dB : 3 dB): ≤ 15 : 1 Video bandwidth (VBW)1 Hz to 3 MHz (1-3 sequence), OFF

∗

Manually settable, or automatically settable according to RBW Noise sidebands: ≤ –100 dBc/Hz (1 GHz, 10 kHz offset) Noise sideband, stabilityResidual FM: ≤ 20 Hzp-p/0.1 s (1 GHz, span: 0 Hz)Frequency drift: ≤ 200 Hz/min (span: ≤ 10 kHz, sweep time: ≤ 100 s)

∗

After 1 hour warm-up at constant ambient temperature Frequency: 10 MHz Reference oscillatorAging rate: 2 x 10
–6 /year (typical); Option 01: 1 x 10
–7 /year, 2 x 10
–8 /dayTemperature characteristics: 1 x 10
–5 (typical, 0 to +50ËšC); Option 01: ±5 x 10
–8 (0 to +50ËšC)

∗

Referenced to frequency at 25ËšC Continued on next page

http://www.anritsu.com 475