Text version of the page

SPECTRUMANALYZERS

?

Option 04: High-speed time domain sweep

Ordering information

12.5 µs, 25 µs, 50 µs, 100 to 900 µs (one most Sweep timesignificant digit settable), 1.0 to 19 ms (two upper significant digits settable)

Please specify model/order number, name, and quantity when ordering.

Model/order No. Name Main frame Accuracy±1% MS2665CSpectrum Analyzer Marker level Log scale: 0.1 dB; Linear scale: 0.2% (relative to resolutionreference level) Standard accessories Power cord, 2.6 m:1 pcF0013Fuse, 5 A:2 pcs W1335AEMS2665C/MS2667C operation manual:1 copyB0329GFront cover (3/4MW4U)

∗

This option is recommended to be mounted together with option 06.

?

Option 06: Trigger/gate circuit

Trigger switchFREERUN, TRIGGERED Options EXTTrigger level: ±10 V (resolution: 0.1 V), TTL level Trigger slope: Rise/fall Connector: BNCVIDEOLog scale: –100 to 0 dB (resolution: 1 dB)Trigger sourceTrigger slope: Rise/fall WIDE IF VIDEO Trigger level: High, middle, or low selectableBandwidth: MS2665C-01Reference crystal oscillator MS2665C-02Narrow resolution bandwidthMS2665C-04High-speed time domain sweepMS2665C-06Trigger/gate circuit MS2665C-07AM/FM demodulator (outputs to loudspeaker or earphone connector)MS2665C-10Centronics interface (GPIB interface cannot be installed simultaneously)MS2665C-15Sweep signal output Warranty ≥ 20 MHzTrigger slope: Rise/fallLINEFrequency: 47.5 to 63 Hz (line lock) MS2665C-90Extended three year warranty service MS2665C-91Extended five year warranty service Application parts J0561Coaxial cord (N-P-5W · 5D-2W · N-P-5W), 1 m J0104ACoaxial cord (BNC-P · RG-55/U · N-P) , 1 m Pre-trigger (displays waveform from previous max. 1 screen at trigger occurrence point)Range:–time span to 0 s Resolution: time span/500 Trigger delayPost trigger (displays waveform from after max. 65.5 ms at trigger occurrence point)Range: 0 to 65.5 msResolution: 1 µs CSCJ-256K-SM 256 KB memory card (meets PCMCIA Rel. 2.0) CSCJ-512K-SM 512 KB memory card (meets PCMCIA Rel. 2.0) CSCJ-001M-SM 1024 KB memory card (meets PCMCIA Rel. 2.0) CSCJ-002M-SM 2048 KB memory card (meets PCMCIA Rel. 2.0)B0395ARack mount kit (IEC)B0395BRack mount kit (JIS)B0391ACarrying case (hard type, with casters) B0391BCarrying case (hard type, without casters)MP612ARF Fuse Holder MP613AFuse Element J0805DC block (Model 7003, 10 kHz to 18 GHz, ±50 V, Weinschel product, N-type)MA2507ADC Block Adapter (50 In frequency domain, displays spectrum of input signal in specified gate interval Gate sweepGate delay: 0 to 65.5 ms (from trigger point, resolution: 1 µs)Gate width: 2 µs to 65.5 ms (from gate delay, resolution: 1 µs) Ω , 9 kHz to 3 GHz, ±50 V, N-type)MA8601ADC Block Adapter (50 Ω , 30 kHz to 2 GHz, ±50 V, N-type)MA8601JDC Block Adapter (75

?

Option 07: AM/FM demodulator

Ω , 10 kHz to 2.2 GHz, ±50 V, NC-type)MA1621A50 Ω→ 75 Ω Impedance Transformer (9 kHz to 3 GHz, ±100 V, NC-type)MP614B50 Voice outputWith internal loudspeaker and earphone connector (ø3.5 jack), adjustable volume Ω↔ 75 Ω Impedance Transformer (50 to 1200 MHz, transformer type, NC-type) J0007GPIB cable, 1 m J0008GPIB cable, 2 m J0742ARS-232C cable, 1 m (for PC-98 Personal Computer and VP-600, D-sub 25 pins, straight)J0743ARS-232C cable, 1 m (for PC/AT compatible, D-sub 9-pins, cross)J0064A7 GHz band coaxial/waveguide adapter (5.8 to 8.6 GHz, N-J· BRJ-7)J0064C10 GHz band coaxial/waveguide adapter (8.2 to 12.4 GHz, N-J · BRJ-10)J0004Coaxial adapter (N-P · SMA-J)

?

Option 10: Centronics interface*

1 Function Outputs data to printer (Centronics standard) ConnectorD-sub 25-pin (jack)

∗

1: GPIB interface can not be installed simultaneously.Sweep output (X)0 to 10 V ±1 V (

?

Option 15: Sweep signal output

≥ 100 k Ω termination, from left side to right side of display scale), BNC connector Sweep status output (Z)TTL level (low level with sweeping), BNC connector DGM010-02000EE Coaxial cord, 2 m (N-type connector, general use) DGM024-02000EE Coaxial cord, 2 m (N-type connector, low-loss type)

http://www.anritsu.com 474