Analyzers catalogue - Anritsu - #465

o Li-

Signal search

AUTO TUNE, PEAK — CF, PEAK — REF, SCROLL

Zone marker

NORMAL, DELTA

Marker -—

MARKER — CF, MARKER — REF, MARKER — CF STEP SIZE, A MARKER — SPAN, ZONE — SPAN

Peak search

PEAK, NEXT PEAK, NEXT RIGHT PEAK, NEXT LEFT PEAK, MIN DIP, NEXT DIP

Multimarker

Number of markers: 10 max. (HIGHEST 10, HARMONICS, MANUAL SET)

Measure

Noise power (dBm/Hz, dBm/ch), C/N (dBc/Hz, dBc/ch), occupied bandwidth (power N% method, X-dB down method), adjacent channel power (REF: total power/reference level/in-band level method, channel designate display: 2 channels x 2 graphic display), average power of burst signal (average power in designated time range of time domain waveform), channel power (dBm, dBm/Hz), template comparison (upper/lower limits x each 2, time domain), MASK (upper/lower x each 2, frequency domain)

Save/recall

Saves setting conditions and waveform data to internal memory (max. 12) or memory card.

Hard copy

Printer (HP dotmatrix, EPSON dotmatrix compatible models):

Display data can be hard-copied via RS-232C, GPIB and Centronics (Option 10) interface. Plotter (HP-GL, GP-GL compatible models): Display data can be output via RS-232C and GPIB interface.

PTA

Language: PTL (interpreter based on BASIC) Programming: Using external computer.

Program memory: Memory card, upload/download to/from external computer Programming capacity: 192 KB

Data processing: Directly accesses measurement data according to system variables, system subroutines, and system functions

RS-232C

Outputs data to printer and plotter. Control from external computer (excluding power switch).

GPIB

Meets IEEE488.2. Controlled by external computer (excluding power switch). Or controls external equipment with PTA. Interface function: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C1, C2, C3, C4, C28

Correction

Automatic correction of insertion loss of MA1621A Impedance Transformer Correction accuracy (RF ATT: >10 dB): ±2.5 dB (9 to 100 kHz), ±1.5 dB (100 kHz to 2 GHz), ±2.0 dB (2 to 3 GHz) *Typical value

Memory card interface

Functions: Saving/recalling measurement parameters/waveform data, uploading/downloading PTA programs;

Applicable cards: SRAM, EPROM, Flash EPROM (Only SRAM writable; Card capacity: 2 MB max. The SRAM

card is supported by Windows95/98® of OS.) Connector: Meets the PCMCIA Rel. 2.0; 2 slots

External mixer

Frequency

Frequency range: 18 to 110 GHz Frequency band configuration

Band K: 18 to 26.5 GHz (n = 4), Band A: 26.5 to 40 GHz (n = 6), Band Q: 33 to 50 GHz (n = 8), Band U: 40 to 60 GHz (n = 9), Band V: 50 to 75 GHz (n = 11), Band E: 50 to 90 GHz (n = 13), Band W: 75 to 110 GHz (n = 16) Span setting range: 0 Hz, (100 x n) Hz to each bandwidth *n: local harmonic order

Amplitude

Level measurement

Mixer conversion loss setting range: 15 to 85 dB

Maximum input level: Depends on the external mixer used

Average noise level: Depends on the external mixer used Reference level setting range: -100 dBm to (-25 to M) dBm *Log scale, M: mixer conversion loss Frequency response: Depends on the external mixer used

Input/output

Suitable mixer: 2-port mixer only (local frequency: 4 to 7 GHz, IF frequency: 689.31 MHz) Display gain: 0 ±2 dB (external mixer input: -10 dBm, when the mixer conversion loss is 15 dB)

Others

EMC

EN61326: 1997/A2: 2001 (Class A) EN61000-3-2: 2000 (Class A) EN61326: 1997/A2: 2001 (Annex A)

LVD

EN61010-1: 2001 (Pollution Degree 2)

Vibration

Meets the MIL-STD-810D

Power (operating range)

85 to 132/170 to 250 Vac (automatic voltage switching), 47.5 to 63 Hz, <400 VA

Dimensions and mass

320 (W) x 177 (H) x 381 (D) mm, <15 kg (without option)

Ambient temperature

0 to +50°C (operate), -40 to +75°C (storage)

Resolution bandwidth (3 dB)

30 Hz, 100 Hz, 300 Hz

Resolution bandwidth switching uncertainty

±0.4 dB (RBW 3 kHz reference)

Resolution bandwidth accuracy

±20%

Selectivity (60 dB : 3 dB)

£15:1

Sweep time

12.5 us, 25 us, 50 us, 100 to 900 us (one most significant digit settable), 1.0 to 19 ms (two upper significant digits settable)

Accuracy

±1%

Marker level resolution

Log scale: 0.1 dB

Linear scale: 0.2% (relative to reference level)

Resolution bandwidth (3 dB)

10 Hz, 30 Hz, 100 Hz, 300 Hz

Resolution bandwidth switching uncertainty

±0.4 dB (RBW 3 kHz reference)

Resolution bandwidth accuracy

±20%

Selectivity (60 dB : 3 dB)

£15:1

Average noise level

£-135 dBm (1 MHz to 1 GHz),

£-135 dBm + 1.5f [GHz] dB (1 to 3.1 GHz),

£-132 dBm (3.1 to 8.1 GHz),

£-131 dBm (8.0 to 14.3 GHz),

£-123 dBm (14.1 to 26.5 GHz),

£-119 dBm (26.2 to 40 GHz)

*RBW: 10 Hz, VBW: 1 Hz, RF ATT: 0 dB