Analyzers catalogue - Anritsu - #464

Frequency

Reference level

Setting range

Log scale: -100 to +30 dBm, Linear scale: 224 uV to 7.07 V Unit

Log scale: dBm, dBuV, dBmV, V, dBuVemf, W

Linear scale: V Reference level accuracy:

±0.4 dB (-49.9 to 0 dBm), ±0.75 dB (-69.9 to -50 dBm, 0.1 to +30 dBm), ±1.5 dB (-80 to -70 dBm)

«After calibration, at 100 MHz, span: 1 MHz (when RF ATT, RBW, VBW, and sweep time set to AUTO) RBW switching uncertainty: ±0.3 dB (1 kHz to 1 MHz), ±0.4 dB (3 MHz) «After calibration, referenced to RBW: 3 kHz Input attenuator (RF ATT)

Setting range: 0 to 70 dB (10 dB steps)

«Manual settable, or automatically settable according to reference level

Switching uncertainty: ±0.3 dB (0 to 50 dB), ±1.0 dB (0 to 70 dB)

«After calibration, frequency: 100 MHz, referenced to RF ATT: 10 dB

Amplitude

Frequency response

Relative:

±1.5 dB (9.0 kHz to 3.2 GHz), ±1.0 dB (100 kHz to 3.2 GHz), ±1.5 dB (3.1 to 8.1 GHz), ±3.0 dB (8.0 to 14.3 GHz), ±4.0 dB (14.1 to 26.5 GHz), ±4.0 dB (26.2 to 40 GHz)

«After pre-selector tuning at microwave band, referenced to midpoint between highest and lowest frequency deviation in each band.

Absolute: ±5.0 dB (9 kHz to 40 GHz, RF ATT: 10 dB, referenced to 100 MHz) «After pre-selector tuning at microwave band

Waveform display

Scale (10 div.)

Log scale: 10, 5, 2, 1 dB/div

Linear scale: 10, 5, 2, 1%/div Linearity (after calibration)

Log scale: ±0.4 dB (0 to -20 dB, RBW: <1 MHz), ±1.0 dB (0 to -70 dB, RBW: <100 kHz), ±1.5 dB (0 to -85 dB, RBW: <3 kHz), ±2.5 dB (0 to -90 dB, RBW: <3 kHz)

Linear scale: ±4% (compared to reference level) Marker level resolution

Log scale: 0.01 dB, Linear scale: 0.02% of reference level

Spurious response

2nd harmonic distortion:

<-60 dBc (10 to 200 MHz, mixer input: -30 dBm), <-70 dBc (0.2 to 1.55 GHz, mixer input: -30 dBm), <-90 dBc or noise level (1.55 to 20 GHz, mixer input: -10 dBm) Two signal 3rd order intermodulation distortion: <-70 dBc (10 to 100 MHz), <-80 dBc (0.1 to 8.1 GHz), <-75 dBc or average noise level (8.1 to 26.5 GHz), <-75 dBc or average noise level (typical, 26.5 to 40 GHz) «Frequency difference of two signals: >50 kHz, mixer input: -30 dBm

Image response: <-65 dBc (<18 GHz), <-60 dBc (<22 GHz), <-55 dBc (<40 GHz)

Multiple/out of band response: <-70 dBc(<14 GHz), <-60 dBc (<26 GHz), <-55 dBc (<40 GHz)

1 dB gain compression

>-5 dBm (>100 MHz, at mixer input)

Sweep

Sweep time

Setting range: 20 ms to 1000 s (manually settable, or automatically settable according to span, RBW, and VBW) Accuracy: ±15% (20 ms to 100 s), ±25% (110 to 1000 s), ±1% (time domain sweep: digital zero span mode)

Sweep mode

Continuous, single

Time domain sweep mode

Analog zero span, digital zero span

Zero sweep

Sweeps only in frequency range indicated by zone marker.

Tracking sweep

Sweeps while tracing peak points within zone marker (zone sweep also possible).

Functions

Number of data points

501

Detection mode

NORMAL: Simultaneously displays max. and min. points between sample points. POS PEAK: Displays max. point between sample points. NEG PEAK: Displays min. point between sample points. SAMPLE: Displays momentary value at sample points. Detection mode switching uncertainty: ±0.5 dB (at reference level)

Display

Color TFT-LCD, Size: 14 cm, Number of colors: 17 (RGB, each 64-scale settable), Intensity adjustment: 5 steps settable

Display functions

Trace A: Displays frequency spectrum. Trace B: Displays frequency spectrum.

Trace Time: Displays time domain waveform at center frequency.

Trace A/B: Displays Trace A and Trace B simultaneously. Simultaneous sweep of same frequency, alternate sweep of independent frequencies.

Trace A/BG: Displays frequency region to be observed (background) and object band (foreground) selected from

background with zone marker simultaneously. Trace A/Time: Displays frequency spectrum, and time domain waveform at center frequency simultaneously. Trace move/calculation: A -- B, B -- A, A —- B, A + B -- A, A — B -- A, A — B + DL -- A

Storage functions

NORMAL, VIEW, MAX HOLD, MIN HOLD, AVERAGE, CUMULATIVE, OVER WRITE

FM demodulation waveform display function

Demodulation range: 2, 5, 10, 20, 50, 100, 200 kHz/div Marker display

Accuracy: ±5% of full scale (referenced to center frequency, DC-coupled, RBW: 3 MHz, VBW: 1 Hz, CW) Demodulation frequency response: DC (50 Hz at AC-coupled) to 100 kHz (range: <20 kHz/div, VBW: off, at 3 dB bandwidth)

DC (50 Hz at AC-coupled) to 500 kHz (range: <50 kHz/div, VBW: off, at 3 dB bandwidth) «RBW: >1 kHz to 3 MHz usable

Input connector

K-J, 50 n

Auxiliary signal input and output

IF OUTPUT: -10 dBm (typical, 100 MHz, upper edge of scale, 50 n terminated), 10.69 MHz, BNC connector

VIDEO OUTPUT (Y): 0 to 0.5 V ± 0.1 V (typical, from lower edge to upper edge at 10 dB/div)

0 to 0.4 V± 0.1 V (typical, from lower edge to upper edge at 10%/div)

BNC connector «75 n terminated at 100 MHz input COMPOSITE OUTPUT: For NTSC, 1 Vp-p (75 n terminated), BNC connector EXT REF INPUT: 10 MHz ±10 Hz, -10 to +2 dBm (50 n terminated), BNC connector

REF BUFFERED OUTPUT: >0 dBm (50 n terminated), BNC connector

1ST LOCAL OUTPUT: 4 to 7 GHz, >+8 dBm, 50 n, SMA-J connector