Analyzers catalogue - Anritsu - (Version JPG) - Page n° 44 - PDF Catalogue | Technical Documentation

See other catalogues for Anritsu

Generator, Spectrum analyzer, Optical multiplexer, Analyzer, Tester

Text version of the page

OPTICAL MEASURING INSTRUMENTS

/inritsu

• Optical sensors


Model		MA9421A	MA9422A	MA9423A	MA9621A	MA9622A*¹
Wavelength range		0.38 to 1.15 urn			0.75 to 1.7 um	1.2 to 1.7 um
Element		SI diode			InGaAs diode
Active area diameter		09.5 mm	09 mm	09.5 mm	01 mm	-
Input		Direct			FC, ST, DIN, HMS-10/A, SC type connector adapter*²	FC, SC, ST, DIN, HMS-10/A, replaceable connector, PC polishing
Measurement	CW (dBm)	-60 to +20 (0.85 um)	-50 to +20 (0.85 um)	-70 to +10 (0.85 um)	-70 to +3 (1.3 um)	-50 to +23 (1.3/1.55 um)
range	MOD (dBm)	-65 to +17 (0.85 um)	-50 to +17 (0.85 um)	-75 to +7 (0.85 um)	-75 to 0 (1.3 um)	-55 to +20 (1.3/1.55 um)
Measurement accuracy*³		±5%*⁴		±5%*⁵	±5%^*6	±5%^*7
Temperature range		0 to +50"C (use), —40 to +70"C (storage)
Dimensions and mass		30 (W) x 30 (H) x 37 (D) mm, <100 g	15 (W) x 16 (H) x 140 (D) mm, <200 g	30 (W) x 30 (H) x 37 (D) mm, <100 g

*1: Applicable connector: SM fiber (ITU-T G.652)

Return loss: >40 dB (1.55 ±0.2 um, only when return loss of optical connector: >45 dB)

Polarization dependency: <0.1 dB (1.55 ±0.02 um) *2: Specify one connector among those shown in the specification table.

When no connector and manufacturer's name are specified, FC-type will be mounted and supplied.

Other than the connectors indicated in the table are dealt in special connectors of custom-made. The ordering method of optical connectors are indicated in

the table on page ??. *3: Used with FC-type connectors *4: At -10 dBm, 0.633/0.78/0.85 um CW light mode *5: At -10 dBm, 0.66/0.78/0.85 um CW light mode *6: At -10 dBm, 0.85/1.3/1.55 um CW light mode *7: At -10 dBm, 1.3/1.55 um CW light mode

• MS0907A Return Loss Measurement Unit*¹


	Applicable fiber	SM (10/125 um, NA 0.1)
	Wavelength	1.31 ±0.03 um (25"C)
	Measurement range	0 to 40 dB (relative to total internal reflection cord, including output connector reflection)
	Measured data display range	0 to 60 dB (relative to total internal reflection cord, excluding output connector reflection)
	Measurement accuracy	±1 dB (relative to the reflection, constant temperature)
	Optical output connector^*2	FC, ST, DIN, HMS-10/A, SC: PC-type
	Temperature range	0 to +50"C (use), -40 to +70"C (storage)
	Dimensions and mass	90 (W) x 93 (H) x 36 (D) mm, <300 g

*1: Laser Product Safety Standards: IEC 60825-1 Class-1, FDA 21CFR Class-1 *2: Specify one connector among those shown in the specification table.

When no connector and manufacturer's name are specified, FC-type will be mounted and supplied.

Other than the connectors indicated in the table are dealt in special connectors of custom-made. The ordering method of optical connectors are indicated in the table on page ??.

Safety measures for laser products

The MS0908A complies with the optical safety standards in Class 1M of the IEC 60825-1 and the FDA (21CFR 1040.10, USA); the following descriptive labels are affixed to the product (FDA label is only affixed to product for export to the USA).

FDA (CFR)

IEC

The maximum output Is Indicated under *1, and the wavelength under *2. Caution: Do not look directly Into the laser beam.

http://www.anritsu.com 41

Analyzers catalogue - Anritsu - #44

Generator, Spectrum analyzer, Optical multiplexer, Analyzer, Tester