Text version of the page

MOBILE COMMUNICATIONS MEASURING INSTRUMENTS

Measuring Instruments3GPP TS34.121 StandardTest Items MD8480BW-CDMA Signaling TesterMS8609ATX Tester 9 kHz to 13.2 GHzMG3681AAWGN SG2 250 kHz to 3 GHzPROPSim C2Multipath Fading Simulator
∗ 1 Clause 7 Performance Requirements 7.2 Demodulation in Static Propagation conditions √√√√ 7.3 Demodulation of DCH in Multi-path Fading Propagation conditions √√√√ 7.4 Demodulation of DCH in Moving Propagation conditions √√√√ 7.5 Demodulation of DCH in Birth-Death Propagation conditions √√√√ 7.6.1 Demodulation of DCH in open-loop transmit diversity mode √√√√ 7.6.2 Demodulation of DCH in closed loop transmit diversity mode √√√√ 7.6.3 Demodulation of DCH in Site Selection Diversity Transmission Power Control mode √√√√ 7.7.1 Demodulation of DCH in Inter-Cell Soft Handover √√√√ 7.7.2Combining of TPC Commands from radio links of different ratio link sets √√√√ 7.8.1 Power control in the downlink, constant BLER target √√√√ 7.8.2 Power control in the downlink, initial convergence √√√√ 7.8.3 Power control in the downlink, wind up effects √√√√ 7.9 Downlink compressed mode √√√√ 7.10 Blind transport format detection √√√√

∗

1: PROPSim C2 Multipath Fading Simulator is a product of ELEKTROBIT.

Specifications

Max. input level+34 dBm (2.5 W) Type N, 50 Ω VSWR ≤ 1.2 (9 kHz to 2.4 GHz: for measuring Maximum Output Power)General
∗ 1 Input/Output connectorVSWR ≤ 1.3 (1 to 3100 MHz: for measuring Blocking characteristics; Frequency range 3)VSWR ≤ 1.5 (3.1 to 8 GHz: for measuring Blocking characteristics; Frequency range 3)VSWR ≤ 1.7 (8 to 13 GHz: for measuring Blocking characteristics; Frequency range 3) Reference oscillatorUses the MS8609A (Option 01 High stable reference recommendation oscillator provided)External reference input enabled (Frequency: 10/13 MHz selectable, BNC connector) Power supplyAC 100 to 120 or 200 to 240 Vac, 50/60 Hz, ≤ 2710 VA, 1400 VA (typ.) Dimensions and mass1710 (W) x 1597 (H) x 797 (D) mm (excluding projections), ≤ 550 kg Operating temperature+15 to +35˚C (operation), 0 to +50˚C (storage) EN61326: 1997/A2: 2001 (Class A)EMCEN61000-3-2: 2000 (Class A)EN61326: 1997/A2: 2001 (Annex A) LVDEN61010-1: 2001 (Pollution Degree 2)

∗

1: The general specifications are applied to use of the ME7417B RF Interface Unit (with 3 dB Attenuator connector).

http://www.anritsu.com 248