Text version of the page

OPTICALMEASURINGINSTRUMENTS

Specifications

Tunics Plus O Tunics Plus E Tunics Plus S Tunics Plus CL Tunics Plus S/WB Tunics Plus CL/WB 1260-1340 nm 1280-1320 nm 1340-1430 nm 1380-1410 nm 1430-1530 nm1440-1500 nm1450-1490 nm 1525-1625 nm1540-1620 nm1560-1600 nm 1390-1540 nm 1420-1520 nm1440-1510 nm 1490-1640 nm 1520-1630 nm1540-1610 nm Absolute wavelength accuracy
1 ±0.04 nm ±0.04 nm ±0.04 nm ±0.04 nm ±0.04 nm ±0.04 nm TuningCharacteristics Tuning repeatability (typ.) ±0.005 nm ±0.005 nm ±0.005 nm ±0.005 nm ±0.005 nm ±0.005 nm Wavelength setting resolution 0.001 nm 0.001 nm 0.001 nm 0.001 nm 0.001 nm 0.001 nm Optical frequency fine tuning ±2 GHz ±2 GHz ±2 GHz ±2 GHz ±2 GHz ±2 GHz Tuning speed (typ.) 1s (100 nm) 1s (100 nm) 1s (100 nm) 1s (100 nm) 1s (100 nm) 1s (100 nm) Power stability
2 ±0.01 ±0.01 ±0.01 ±0.01 ±0.01 ±0.01 Side modesuppression ratio
3 > 45 dB > 45 dB > 45 dB > 45 dB > 45 dB > 45 dB Laser Output Characteristics Signal to source spontaneous-emission ratio > 55 dB > 55 dB > 55 dB > 55 dB > 55 dB > 55 dB
4 Relative intensity noise
3,5 -145 dB/Hz (typ.) -145 dB/Hz (typ.) -145 dB/Hz (typ.) -145 dB/Hz (typ.) -145 dB/Hz (typ.) -145 dB/Hz (typ.) Sweeping Mode Option Characteristics Whole wavelength range for each specified power Whole wavelength range for each specified power Whole wavelength range for each specified power Whole wavelength range for each specified power Whole wavelength range for each specified power Whole wavelength range for each specified power Scan speed Adjustable from 1 to 100 nm/s Adjustable from 1 to 100 nm/s Adjustable from 1 to 100 nm/s Adjustable from 1 to 100 nm/s Adjustable from 1 to 100 nm/s Adjustable from 1 to 100 nm/s Sweeping Mode OptionCharacteristics Power flatness during scan (typ. ±0.25 dB ±0.25 dB ±0.25 dB ±0.25 dB ±0.25 dB ±0.25 dB Power repeatability from scan to scan(typ.) ±0.05 dB ±0.05 dB ±0.05 dB ±0.05 dB ±0.05 dB ±0.05 dB
6 Optical connector FC-APC FC-APC FC-APC FC-APC FC-APC FC-APC Output fiber SMF-28™ SMF-28™ SMF-28™ SMF-28™ SMF-28™ SMF-28™ Output isolation 35 dB 35 dB 35 dB 35 dB 35 dB 35 dB Return loss 60 dB 60 dB 60 dB 60 dB 60 dB 60 dB Interfaces Remote control RS-232 Cand IEEE-488.1 RS-232 C and IEEE-488.1 RS-232 C and IEEE-488.1 RS-232 C and IEEE-488.1 RS-232 C and IEEE-488.1 RS-232 C and IEEE-488.1 Low frequency modulation 10 kHz to 8 MHz 10 kHz to 8 MHz 10 kHz to 8 MHz 10 kHz to 8 MHz 10 kHz to 8 MHz 10 kHz to 8 MHz High frequencymodulation 30 kHz to 1 GHz 30 kHz to 1 GHz 30 kHz to 1 GHz 30 kHz to 1 GHz 30 kHz to 1 GHz 30 kHz to 1 GHz Operatingtemperature range +15 to +30°C +60 to +85°F +15 to +30°C +60 to +85°F +15 to +30°C +60 to +85°F +15 to +30°C +60 to +85°F +15 to +30°C +60 to +85°F +15 to +30°C +60 to +85°F Power supply 100 to 240 V 50 to 60 Hz 100 to 240 V 50 to 60 Hz 100 to 240 V 50 to 60 Hz 100 to 240 V 50 to 60 Hz 100 to 240 V 50 to 60 Hz 100 to 240 V 50 to 60 Hz Environment Dimensions(W x H x D) in mm
3 448 x 133 x 370 448 x 133 x 370 448 x 133 x 370 448 x 133 x 370 448 x 133 x 370 448 x 133 x 370 Weight 12.5 kg 12.5 kg 12.5 kg 12.5 kg 12.5 kg 12.5 kg Unless otherwise specified, specifications are given after 30 minutes warm-up.
1 After self calibration
2 Over one hour at a constant temperature and after 1 hour warm-up
3 Measured with 0 dBm output power
4 Spontaneous emission measured on a 0.1 nm bandwidth at ±1 nm from the signal
5 Measured at an electrical frequency of 100 MHz
6 Over 100 scans at constant temperature Wavelength range(mode hop free)? P = 0 dBm ? P = 3 dBm ? P = 6 dBm ? P = 8 dBm

Ordering Information

For the most current ordering information, please visit our website. http://www.nettest.com ? http://www.anritsu.com 148