Manual spring tester Springtest T1 - ANDILOG - #1

Text version of the page

- Manual test stand TEX555 - Force gauge Centor Easy with internal sensor up to 1000N or external sensor for the 2000N version - Digital ruler length 150mm - Compression plate diameter 50mm - Self-levelling plate diameter 80mm - Certificate of calibration The SPRINGTEST T1 series is a very simple and economical system for checking compression springs in one point. The force gauge gives the force applied, the displacement sensor on the side shows the flexion or height measured under load. With its revolving hand crank, it is designed to perform tests from low capacity (10N) to high capacity (2000N) with quick results. The manual test stand features a small footprint, durable design, portable and a optional a digital travel display. Combined with our Centor force gauges, the SPRINGTEST T1 can measure any compression spring in production or laboratory for an affordable price. The parallelism of the lower plate can be adjusted to ensure correct seating for the spring. – Operates in tension and compression – Accuracy 0.1% of the full scale – Resolution 1/10,000 of the full scale – Peak function for tension and compression – Simultaneous display of the peak and the current reading – Bar graph – 5 units available: N, kg, lbs, g, oz – Sampling rate 1,000 Hertz – Tare function – Auto-off adjustable from 5 to 15 min, can be deactivated – Programmable set point function – Average and standard deviation functions – Two-way RS232 output: transmission of current reading, minimum, or maximum, as desired – Digimatic output – 8 hours of operation without recharging – Fast charge – Reversible display – Backlit display – Sensor protected from overloads up to 200% of its capacity – Operates on rechargeable batteries – Low battery indicator – Memorizes its configuration – Metal casing and protective elastomer overmould ISO A complete range in force measuring instruments 9001:2000 Certified Digital ruler 50mm top plate Self-levelling bottom plate High capacity manual spring tester Models Capacity Accuracy Force resolution Travel Displacement resolution Springtest T1-100 0 - 100N 0.1 N 0.01 N 0.01 mm Springtest T1-500 0 - 500N 0.5 N 0.05 N 0.01 mm Springtest T1-1000 1 N 0.1 N 150 mm 0.01 mm 150 mm 150 mm 0 - 1000N Package includes Technical characteristics Models & capacities Springtest T1-2000 2 N 0.2 N 150 mm 0.01 mm 0 - 2000N