catalogue search
P. 01
P. 02
|
|
You may also be interested in
Explosive detection, Monitoring software, Software, Process software, Detection system
Text version of the page
| IFEGARD II I CG- I | |||||||||||||||||||
| The Most Powerful Non-Invasive Monitor in its Class | |||||||||||||||||||
| The Analogic UFEGARD® II is the most powerful, non-invasive monitor in its class available today This versatile monitor measures seven vital signs plus up to 17 hemodynamic values and can be used anywhere in the hospital or office environment • Up To 7 Non-invasive Measurements -ECG (HR), RESP, SpO2, NIBP, TEMP and ICG, orCC>2 • Continuous Non-Invasive Cardiac Output -ICG (Impedance Cardiography) to calculate 17 hemodynamic values including cardiac output • Microstream® continuous airway CO2 and breath rate • Up To 25 Measured and Derived Vital Sign Parameters Facilitate a More Comprehensive Patient Assessment • 3-hour Typical Battery Life for Prolonged Transport Monitoring • User Interface that Enhances Simplicity of Use, Data Presentation, and Confirms Signal Integrity • Large Color Display - Exceptional Data Visualization • Network Ready for Connection to LIFEGARD Vue Central Alarm Annunciation System • 3- or 5-Lead ECG with Support for 2-Lead Simultaneous Display when Using 5 Leads | |||||||||||||||||||
| r- | |||||||||||||||||||
| CO | |||||||||||||||||||
| Specifications | |||||||||||||||||||
| ECG Performance Leads: 3 or 5 leads, user selectable Heart Rate Range: 20 to 250 bpm Heart Rate Accuracy: ±1 bpm or ±1% Bandwidth-Normal Monitoring: 0.5 Hz to 40 Hz Bandwidth-Extended Low Frequency Range (user selectable): 0.05 Hz to 40 Hz Display Sweep Speeds: 12.5,25,50 mm/sec ECG Size (Sensitivity): 0.5,1,2,4 mV/cm Lead-Off Detection with display indicator Pacemaker Detection Mode: Indicator on waveform display, user selectable Standards: ANSI/AAM EC13 Differential Input Impedance: > 5 MQ Common Mode Rejection Ratio: >90dBat50or60Hz Input Dynamic Range: ± 5 mV AC, ± 300 mV DC Defibrillation Artifact Recovery Time: < 5 sec conforming to AAMIEC13 Respiration Performance Range: 3 to 150 breaths per minute Accuracy: ± 3 breaths per minute Display Sweep Speeds: 6.25,12.5,25 mm/sec NIBP Performance Blood Pressure Accuracy: Meets performance standards of ANSI/AAM SP10(1) Technique: Oscillometric Pulse Rate Range: 40 to 200 bpm Maximum Cuff Pressure: Safety Limited to 300 mmHg Pulse Rate Accuracy: ±2 bpm or ±2% Initial Cuff Inflation is User Adjustable; Factory Default: 160 mmHg (adult mode); 120 mmHg (pediatric mode) Subsequent CuffInflation; Previous; Systolic ±30 mmHg | |||||||||||||||||||
| Blood Pressure Measurement Range Systolic: 40 to 250 mmHg Diastolic: 20 to 200 mmHg Mean Arterial Pressure: 27 to 220 mmHg Measurement Modes Auto: Automatic measurements at intervals of 1, 3,5, 10, 30, 60 and 90 minutes Manual: Single measurement initiated by Start/Stop button STAT: Series of consecutive measurements for 5 minutes SpO2 Performance Nellcor® OXIMAX™ Technology %SaturationRange: 1%to100% Pulse Rate Range: 30 to 250 bpm SpO2 Accuracy: 70% to 100% ± 3 digits with DS100A sensor Pulse Rate Accuracy: ± 3 bpm Temperature Performance Range: 15°C to 45°C (59°F to 113°F) Accuracy: ± 0.1°C (0.18°F) Compatible with YSI 401 and 409 Temperature Probes | |||||||||||||||||||