catalogue search
P. 01
P. 02
|
|
You may also be interested in
Explosive detection, Monitoring software, Process software, Software, Detection system
Text version of the page
| LIFEGARD II | |||||||||||||||||||
| The Most Powerful Non-Invasive Monitor in its Class | |||||||||||||||||||
| m | |||||||||||||||||||
| The Analogic LIFEGARD® II is the most powerful, non-invasive monitor in its class available today This versatile monitor measures five vital signs and can be used anywhere in the hospital or office environment • Up To 5 Non-invasive Measurements -ECG (HR), RESP, SpO2, NIBP, or TEMP • 4-hour Typical Battery Life for Prolonged Transport Monitoring • User Interface that Enhances Simplicity of Use and Data Presentation • Large Color Display - Exceptional Data Visualization • Network Ready for Connection to LIFEGARD Vue Central Alarm Annunciation System • 3 or 5 Lead ECG with Support for 2-Lead Simultaneous Displaywhen Using 5 Leads | |||||||||||||||||||
| r- | |||||||||||||||||||
| CO | |||||||||||||||||||
| Specifications | |||||||||||||||||||
| ECG Performance Leads: 3 or 5 leads, user selectable Heart Rate Range: 20 to 250 bpm Heart Rate Accuracy: ± 1 bpm or ±1% Bandwidth - Normal Monitoring: 0.5 Hz to 40 Hz Bandwidth-ExtendedLow FrequencyRange (user selectable): 0.05 Hz to 40 Hz Display Sweep Speeds: 12.5,25,50 mm/sec ECG Size (Sensitivity): 0.5,1,2,4 mV/cm Lead-Off Detection with display indicator Pacemaker Detection Mode: Indicator on waveform display, user selectable Standards: ANSI/AAMIEC13 Differential Input Impedance: >5MQ Common Mode Rejection Ratio: >90dBat50or60Hz Input Dynamic Range: ± 5 mV AC, ± 300 mV DC Defibrillation Artifact Recovery Time: < 5 sec conforming to AAMIEC13 Respiration Performance Range: 3 to 150 breaths per minute Accuracy: ± 3 breaths per minute Display Sweep Speeds: 6.25,12.5,25 mm/sec NIBP Performance Blood Pressure Accuracy: Meets performance standards of ANSI/AAMI SP10(1) Technique: Oscillometric Pulse Rate Range: 40 to 200 bpm Maximum Cuff Pressure: Safety Limited to 300 mmHg Pulse Rate Accuracy: ±2 bpm or ±2% Initial Cuff Inflation is User Adjustable; Factory Default: 160 mmHg (adult mode); 120 mmHg (pediatric mode) Subsequent Cuff Inflation: Previous Systolic ±30 mmHg | |||||||||||||||||||
| Blood Pressure Measurement Range Systolic: 40 to 250 mmHg Diastolic: 20 to 200 mmHg Mean Arterial Pressure: 27 to 220 mmHg Measurement Modes Auto: Automatic measurements at intervals of 1, 3,5, 10, 30, 60, and 90 minutes Manual: Single measurement initiated by Start/Stop button STAT: Series of consecutive measurements for 5 minutes SpO2 Performance Nellcor® OXIMAX™ Technology % Saturation Range: 1% to 100% Pulse Rate Range: 30 to 250 bpm SpO2 Accuracy: 70% to 100% ± 3 digits with DS100A sensor Pulse Rate Accuracy: ± 3 bpm Temperature Performance Range: 15°C to 45°C (59°F to 113°F) Accuracy: ± 0.1°C (0.18°F) Compatible with YSI 401 and 409 Temperature Probes | |||||||||||||||||||
| The World Resource for Health & Security Technology | |||||||||||||||||||