Amprobe’s ACD-10 PLUS meters offer thinner jaws over standard clamp meters. Allowing access to tight measurement areas and still accomodating conductors up to 25 mm. Both meters also measure Capacitance and Frequency. Frequency is measured by either jaws or test leads. Very versatile clamp multimeters.
ACD-10 PLUS, ACD-10 TRMS-PLUSClamp Multimeters with Unique Thin Jaws
B TRMS Measurement (ACD-10 TRMS PLUS only)
B Hold & Maximum reading functions
B AC and DC Voltage to 600V
B Auto ranging
B AC Current to 600A
B Thinner jaws (approx 6.35mm thinner)
B Resistance to 40 M 7 with Continuity Buzzer
B In Rush Current
B Jaw opening 25 mm
B Capacitance to 3000 µF
B Safety acc. EN 61010, CAT III/600 V
B Frequency measurement
FEATURES ACD-10 TRMS-PLUS ACD-10 PLUS
TRMS Measurement
Yes
AC Voltage
4.000, 40.00, 400.0, 600V
DC Voltage
400.0m, 4.000, 40.00, 400.0, 600V
AC Current
40.00, 400.0, 600A
Resistance with Continuity Buzzer
0-400.0 7 , 4.000 k 7 , 40.00 k 7 , 400.0 k 7 , 4.000 M 7 , 40.00 M 7
Capacitance
500.0nF, 5.000µF, 50.00µF, 500.0µF, 3000µF
Frequency (Using Jaw or Test Leads)
40-400Hz with Jaw, 10Hz to 100kHz with test leads
400A Clamp Multimeters
These unique mini-clamp meters meet your needs when measuring up to 400 amps.Their compact size make them a handy daily tool to fit into the slightest of tool kits. With an easy to read digital display, Data Hold capability, Analog Bargraph and 10 mA resolution when using the 40A range.
B 400 A AC range
B Data Hold
B 600 V AC and DC range (only AC40B)
B Auto power-off
B 4000-count display with bargraph
B Jaw opening 25 mm
B 10mA resolution in lowest range
B Safety acc. EN 61010, CAT III/600 V
B Autoranging
FEATURES AD40B AC40B
AC Voltage
400.0, 600 V
DC Voltage
400.0, 600 V
AC Current
40.00, 400.0 A
Resistance
400 7
Continuity (audible)
Continuous Tone and •)))Display at R < 40 7
Overload Protection
660A for AC current only660V RMS for all other measurements
02 For detailed specifications go to www.Amprobe.eu