Catalogues - length-measuring-systems

ML-Measu

ring length

GL-Overall length

Catalogue Length Measuring Systems

www.amo-gmbh.com

Page

/ 28

Where to buy
this product ?

/ 28

See other catalogues for AMO

Text version of the page

Technical Data: LMB-100 measuring tape

© Count dlrcectlon

Grating pitch: 1000 um Linearity error: LMB-100.0 =±20 um

LMB-100.1 =±10 um LMB-100.2 =± 5 um Coefficient of expansion: ~11ppm

Measuring length: Up to a maximum of 30 m Mechanical execution: Stainless-steel measuring tape, with adhesive layer for mounting Reference position: Normally in the middle, any position and number, or distance-encoded (see description on page 24)

Ordering code:

RI position (like above sketch)

0 ... none

1 ... 50 mm from the left

2 ... central

3 ... 50 mm from the right

4 ... 100 mm from the left

5 ... 100 mm from the right

6 ... 50 mm from both sides

7 ... 100 mm from both sides

8 ... all 100 mm

9 ... Special RI position(s) (requires a special no. Sxx) K1 ... distance-coded (basic spacing 40 mm)

K2 ... distance-coded (basic spacing 80 mm) K3 . distance-coded (basic spacing 120 mm)

LMB-100.

Tape length in mm

Linearity error

0 ... ±20 um

1 ... ±10 um

2 ... ±5 um

LMK-10D scanning head

Operating temperature: Storage temperature: Protection class:

0° to 70° C (higher temperatures by request) -20°C to 85°C Scanning head: IP 67 Connector electronics / versions with CONNEI connector: IP 67 Connector electronics / version with 15-pin Sub-D connector: IP 54

<400 m/s² for 55 - 2000 Hz <2000 m/s² for 6 ms

See the following table (sensor lines available, see page 26)

PUR jacket, high flexibility, dmr 5.3 mm, 5(2x0.05) + 1 (2x0.14) mm²

(Bending radius: 10 x d = 50mm continuous bending; 5 x d = 25mm single bend)

• LMK-101. 0 analog output 1 Vpp to 120 Q terminating resistor-

with sinus output of 1000 um or 40 um ^! LMK-102. D TTL output - resolution as in the following table Limit switch function (see description on page 22) LED on the connector housing as an assembly aid (by request)

Vibration: Shock: Power supply: Cable:

Output signals:

(see diagram on page 23)

Optional: Max. Speed:


Type	Output signal/resolution	Speed	Power Supply 5V ±5%
LMK-101.0	1 Vpp/1000 um	10 m/s	260 mA
LMK-101.3	1 Vpp/40 um	10 m/s	260 mA
LMK-102.0	TTL/10 um*	20 m/s	300 mA
LMK-102.1	TTL/5 um*	20 m/s
LMK-102.4	TTL/1 um*	10 m/s
LMK-102.5	TTL/0.25 um*	2.5 m/s

*) after 4x edge evaluation