Model Type T Hydraulic Deadweight Tester
8Pages

{{requestButtons}}

Catalog excerpts

Model Type T Hydraulic Deadweight Tester - 1

Hydraulic Deadweight Tester Accuracy to ±0.015% of Indicated reading Accuracy ±0.025 and 0.100% is also available Repeatebility ±0.005% of Indicated reading Flexible configurations to meet differing applications - single column for field use - dual column for lab use Robust construction allows for repeated daily use Proven in design and application to meet your needs Complete tester with tools, cases, and fittings Traceable certification supplied with each tester PRODUCT DESCRIPTION The M&G Type T Hydraulic Deadweight Tester offers laboratory accuracy in an instrument that is designed to withstand an industrial environment. These testers are designed to be primary pressure standards and are available in several ranges and engineering units Laboratory accuracy The M&G Type T Deadweight tester is available in ranges to 1,000 bar (15,000 psi). This robust tester has been engineered to withstand the stresses of daily operation in a manufacturing environment and still maintain its accuracy and repeatability. The Type T is constructed of 300 series stainless steel and Monel and is supplied with Buna N O-rings as a standard unit. Viton and EPT O-rings are optional. This deadweight can use a water/alcohol mix or hydraulic oils for the pressure medium.

Open the catalog to page 1
Model Type T Hydraulic Deadweight Tester - 2

Model T® Hydraulic Deadweight Tester FEATURES Three accuracies available These instruments are available in ±0.100%, ±0.025%, and ±0.015% of reading. The accuracy stated is the overall accuracy of the tester. The accuracy takes into account linearity, hysteresis, and repeatability. It would also account for intrinsic corrections. Site corrections are the user’s responsibility and the unit will not perform as specified without them. The testers are manufactured to either International Standard Gravity of 9.80665 m/s2 or to a user specified local gravity. Re-entrant piston / cylinders The...

Open the catalog to page 2
Model Type T Hydraulic Deadweight Tester - 3

Model T® Hydraulic Deadweight Tester Overhung weight carriers Another feature of Type T deadweight tester is the way that the weights are positioned on the carrier. M&G utilizes an overhung weight carrier design. This design employs a tube carrier that is positioned over the column and onto the piston driver. The center of gravity for the stack of weights is lowered, reducing side thrust and friction; which lengthens the life of the piston/ cylinder assembly. This also improves measurement accuracy. Weight carrier Deadweight piston & cylinder Instrument under test Test manifold Check valves...

Open the catalog to page 3
Model Type T Hydraulic Deadweight Tester - 4

Model T® Hydraulic Deadweight Tester FUNCTIONAL SPECIFICATIONS General Process Information for Calibrated Parts Local gravity values must be specified by customer in gals, cm/sec sec, or m/sec sec. Include serial number, accuracy, gravity, and model number of deadweight tester when ordering weight sets or calibrated parts. Masses for weights ordered separately, including tolerance, must be supplied by customer; unless combined with tester on same order. Calibrated parts may be made to archival data if requested on the purchase order. Calibrated parts are certified for physical dimension...

Open the catalog to page 4
Model Type T Hydraulic Deadweight Tester - 5

Model T® Hydraulic Deadweight Tester ORDERING INFORMATION Single column / Single piston / cylinder units Model Engineering units Range area Metric units are supplied with Complete Data Certifications as indicated by “/C’ Metric units are supplied with 0.025% of Reading Accuracy as indicated by “-1’ Single column / Dual piston / cylinder units Model Engineering units Range area

Open the catalog to page 5
Model Type T Hydraulic Deadweight Tester - 6

Model T® Hydraulic Deadweight Tester ORDERING INFORMATION - continued Single column / Dual piston / cylinder units Model Engineering units Range area Engineering units Range area Dual column / Dual piston / cylinder units Model

Open the catalog to page 6
Model Type T Hydraulic Deadweight Tester - 7

Model T® Hydraulic Deadweight Tester ORDERING INFORMATION - continued Special 0.015% Accuracy units Model Engineering units Range area These configurations are at Local Gravity (supplied on the Order) Units have one independent weight set for each piston/cylinder combination Other configurations are considered upon request Options Accuracy: Gravity: Certification: for 0.025% of Reading add “-1/C” to model number These units are all supplied with Data for 0.015% of Reading* add “-1AL/C” to model number 0.015% units are not considered standard and are subject to quotation of user...

Open the catalog to page 7
Model Type T Hydraulic Deadweight Tester - 8

T-250 Pump rebuild kit - Type T Buna N (standard material) T-559 Pump rebuild kit - Type T VITON (optional material) T-326 Pump rebuild kit - Type T EPT (optional material) T-258 Piston/cylinder assembly kit - Type T Buna N (standard material) T-323 Piston/cylinder assembly kit - Type T VITON (optional material) T-576 Piston/cylinder assembly kit - Type T EPT (optional material) WG-109 Isolates media from piston/cylinder assembly - Buna N MGAAA/QT Tester oil - 0.95 l (1 qt) MGAAA/GL Tester oil - 3.79 l (1 gal) 99-90019 Oil dispenser T-134 Union body (15/16-20 UNEF male x 1/4” NPT female)...

Open the catalog to page 8

All Ametek STC catalogs and technical brochures

  1. PTC-125 Cooler

    12 Pages

  2. PTC Series

    13 Pages

  3. CPF

    4 Pages

  4. 30 series

    4 Pages

  5. JofraCloud

    6 Pages

Archived catalogs

  1. HPC40 Series

    7 Pages