ASC-400 - Advanced Signal Calibrator
12Pages

{{requestButtons}}

Catalog excerpts

ASC-400 - Advanced Signal Calibrator - 1

ASC-400 Advanced Signal Calibrator User friendly and innovative \METEK* SENSORS, TEST & CALIBRATION

Open the catalog to page 1
ASC-400 - Advanced Signal Calibrator - 2

Advanced Simplicity Optimal read out visibility and high accuracy Large full color display and extremely user friendly interface. The ASC-400 accuracy is designed to meet high demands from modern sensores and transmitters Input and output RTD: 16 different types, TC: 13 different types, Current 0-24 mA DC, Voltage 0-20 VDC, Frequency 0.05 to 10,000 Hz, Pulse train out-put, Resistance 5 to 4000 Ohm Simultaneoues read-back and fast RTD simulation Including isolated read-back from device-under-test of mA, V, and pressure. The RTD simulation feature is fast enough to work with pulsed...

Open the catalog to page 2
ASC-400 - Advanced Signal Calibrator - 3

Unique “non-menu” user interface Easy to use, single layer user interface, no deep menu structure! Operate and set up ASC-400 to perform your tasks, fast and intuitive. Terminal block Read-back display The upper half of the full color display is dedicated to the read-back signal from the device-under-test. This input section is electrically isolated from the circuitry. You can also read pressure from the pressure modules in this display section. All input and output connectors are placed away from the display and keyboard to give maximum freedom to operate. We call it the wireless keyboard…...

Open the catalog to page 3
ASC-400 - Advanced Signal Calibrator - 4

If you by mistake connect the ASC-400 to over voltage, the unit is protected with a fuseless protection feature. This feature protects the unit and prevents expensive repairs and recalibration of the unit. To avoid injury never connect the unit to the mains supply! 5 "intelligent" memories Full storage, all settings on both upper & lower channel are stored. Customer defined memory names. Useful large soft case (Option C) As an option you can get the ASC-400 delivered with a large padded soft case. The spacey soft case is designed for protection during transport. The soft case has separate...

Open the catalog to page 4
ASC-400 - Advanced Signal Calibrator - 5

Gauge or Absolute pressure? (Option baro) The choice is yours! The BARO option turns any gauge measuring APM into an absolute measuring device. Accuracy: ± 0.5 mbarA / 0.00725 psiA Range: 700 to 1100 mbarA / 10.153 to Includes all effects of linearity, hysteresis, temperature (-10 to 50°C / 14 to 122°F) and stability for one year. Please note the BARO option is factory installed. APM Pressure Modules (Accessory) When used with APM CPF Series pressure modules the ASC-400 becomes a true pressure calibrator with features such as; leak test, switch test, scaling and online % error...

Open the catalog to page 5
ASC-400 - Advanced Signal Calibrator - 6

Temperature Sensor (Option T) • Temperature sensor, -40 to 155°C/-40 to 311°F • Delivered with international traceable calibration certificate and CvD coefficients, ready to enter into any ASC • Sensor dimensions ø 4 x 200 mm + handle • Calibration points, -40,-20,0,50,100,155°C/-40,-4,32,122,212,311°F • Calibration accuracy ± 0.030°C/0.054°F

Open the catalog to page 6
ASC-400 - Advanced Signal Calibrator - 7

AMETEK SENSORS, TEST & CALIBRATION Maximum current output is 3 mA Output impedance 0.010 ohm. Thermocouple Cold junction Maximum current output in voltage ranges is 3 mA Output impedance 0.050 ohm / Input resistance 1 Mohm True Ohm Measurement current (pulsed) 0.25 mA. 3W measurement current match 1% Source exitation current IEXI(max) = 2.0 V / R, IEXI must never exceed 3 mA. Pulsed current (source) Unit is compatible with smart transmitters and PLCs with pulse > 5 ms. Current - mA and loop Frequency Pulse Input voltage amplitude range on frequency is 1 to 20 V, Trigger level 0.2 to 10...

Open the catalog to page 7
ASC-400 - Advanced Signal Calibrator - 8

Thermo couple Type Does not include thermocouple wire error and CJC. AMETEK SENSORS, TEST & CALIBRATION

Open the catalog to page 8
ASC-400 - Advanced Signal Calibrator - 9

Read accuracy is based on 4 wire input. Source accuracy in terminals 2 wire source. AMETEK SENSORS, TEST & CALIBRATION

Open the catalog to page 9
ASC-400 - Advanced Signal Calibrator - 10

Specified temperature range -10 to 50°C / 14 to 122°F (APM CPF & BARO option) Vacuum FS, 1 bar / 100 kPA / 14.5 psi. F.S. (full scale) is the numerical value of the positive pressure range. Accuracy includes hysteresis, nonlinearity, repeatability and reference standard uncertainty, 1 Year typical longterm stability, operated inside the rated temperature span and pressure range. Requiring frequently zeroing. Absolute pressure APM CPF with ASC-400 BARO option / 12 month Accuracy ±

Open the catalog to page 10
ASC-400 - Advanced Signal Calibrator - 11

Standard delivery • 2 sets of test leads & test clips (black & red) Handy soft case, with pocket for the test leads and an opening in the top to provide easy access to the test terminals Full international traceable calibration certificate Multi-function Signal Calibrator BARO Barometric module to absolute pressure mode (optional) Certificate F Traceable Certificate to International Standards Accredited Certificate - ISO17025 (optional) Accessories (Optional) A External Power Supply Power Supply /Charger plus 6 x Ni-MH rechargeable AA Large padded soft case with shoulder strap Temperature...

Open the catalog to page 11
ASC-400 - Advanced Signal Calibrator - 12

Accessories 121983 Extension Cable for Type K - 5 m 122523 Extension Cable for Type N - 5 m 120519 Thermocouple Male Plug - Type Cu-Cu - White 120518 Thermocouple Male Plug - Type R / S - Green 120517 Thermocouple Male Plug - Type K - Yellow 120516 Thermocouple Male Plug - Type J - Black 120515 Thermocouple Male Plug - Type T - Blue 120514 Thermocouple Male Plug - Type N - Orange 2206011 Thermocouple plug + K wire + alligator 2206012 Thermocouple plug + T wire + alligator 124720 External Power Supply / Charger 9VDC/200mA -...

Open the catalog to page 12

All Ametek STC catalogs and technical brochures

  1. PTC-125 Cooler

    12 Pages

  2. PTC Series

    13 Pages

  3. CPF

    4 Pages

  4. 30 series

    4 Pages

  5. JofraCloud

    6 Pages

Archived catalogs

  1. HPC40 Series

    7 Pages