Catalogs >
AMETEK Process Instruments >
920 Multi Gas Analyzer

920 Multi Gas Analyzer
2Pages

Catalog excerpts

AMETEK , PROCESS INSTRUMENTS A PRODUCT DATA SHEET 920 Multi-Gas Analyzer Multicomponent analyzer capable of measuring up to five different gases simultaneously The 920 is specifically configured for monitoring the stack emissions of multiple pollutants on a concentration basis. It measures as many as five pollutants at stack conditions. Robust and reliable The 920's ultraviolet (UV)-based measurements do not suffer from water (H2O) and carbon dioxide (CO2) interference. They can also have a wide dynamic range for some measurements. This greatly simplifies sample handling and integrity as there is no need for sample drying. Fully extractive, heated wet basis The 920's sample system components are simply heated above the dew point of the sample gas. This results in a simpler and more accurate calculation of gas concentrations, requiring no corrections for condensed and dissolved components. The analyzer performs all necessary sample gas and calibration gas flow management, and probe and sample line temperature control. The 920 is a full function continuous emissions monitoring (CEM) system which requires the addition of only a sample probe and sample line to be fully operational. Housing options for the analyzer include a cabinet or walk-in shelter built to your specifications. • Hot/wet analysis - No water compensation or correction factors required • Multi-range sulfur dioxide (SO2) • Simultaneous, independent nitric oxide (NO) and nitric dioxide (NO2) measurement • Automated zero and span calibration • Serial communication with plant distributed control system (DCS) • Capable of measuring oxygen (O2) with the addition of an optional zirconium oxide (ZrO2) sensor pi APPLICATIONS • Power boiler emissions monitoring • Sulfur plant stack and feed gas monitoring • Multiple range SO2 monitoring in sulfuric acid plants • Process monitoring in nitric acid plants • Smelter stack monitoring • Sulfuric acid plant control • Sulfur recovery unit (SRU) tail gas clean-up • SRU feed gas • Titanium dioxide (TiO2) production and stack gas Q KEY MARKETS • Sulfur recovery/sulfuric acid • Wet scrubbers • Fine chemicals To find out more or request a quote visit our website AT ametekpi.com

Open the catalog to page 1

PRODUCT DATA SHEET PERFORMANCE SPECIFICATIONS Methodology SALES, SERVICE & MANUFACTURING WORLDWIDE SALES AND SERVICE LOCATIONS Canada - Alberta 2876 Sunridge Way NE Calgary AB T1Y 7H9 Tel: +1 403 235 8400 Fax: +1 403 248 3550 AMETEK* PROCESS INSTRUMENTS © 2018, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. F-0179 Rev 8 (0818) One of a family of innovative process analyzer solutions from AMETEK Process Instruments. Specifications subject to change without notice.

Open the catalog to page 2

920 Multi Gas Analyzer 2Pages

Catalog excerpts

All AMETEK Process Instruments catalogs and technical brochures

920 Multi Gas Analyzer
2Pages