Model SST Slim-Line Submersible Level Transmitter - AMETEK PMT Products - #1

Text version of the page

Tel: 215-355-6900 www.ametekpmt.com Model SST excellent linearity and repeatability, low hysteresis and long term stability. The Model SST is easy to install, too. Simply lower the transmitter into a vessel or well. It’s that easy. All the electronics are mounted in a submersible 316 stainless steel housing. The transmitter is available calibrated for any span needed, from 0 to 15 psi or 0 to 1 bar (0 to 34 feet or 0 to 10.5 meters of water) to 0 to 150 psi or 0 to 10 bar (0 to 345 feet or 0 to 105 meters of water). Features 0.69 • inch diameter to fi t in small bore systems • Solid state semiconductor sensor for accuracy and reliability • Rugged 316 stainless steel diaphragm and housing with excellent environmental protection • Easy to install and use • Removable, nonclogging snubnose end protects sensing elements • 2 wire 4 to 20 mA output • Vented to the atmosphere through the surface end of the cable • Reverse polarity, surge, and lightning protection • Anti-snag feature for easy probe removal Applications • Small bore applications • Tanks • Ponds • Rivers • Lakes • Water wells • Landfi lls • Flood channels Description The Model SST Submersible Level Transmitter provides the same high quality level measurement capability as our other level products, but in a smaller package. The 0.69 inch diameter housing allows the unit to fit into small bore applications. The simple design and rugged construction of this solid state instrument provide long lasting service with virtually no maintenance. The Model SST Transmitter indicates the level of liquid by continuously measuring hydrostatic pressure via its sensing element, an ion implanted silicon semiconductor chip with an integral Wheatstone Bridge. Once the sensor measures the pressure, the data is transmitted by a 4 to 20 mA two wire output signal. This design provides for Slim-Line Submersible Level Transmitter