Catalogs >
AMETEK PMT Products >
1555 and 1558 4? Gauges, SST Case with Brass Internals

1555 and 1558 4? Gauges, SST Case with Brass Internals
2Pages

Catalog excerpts

1555 and 1558 4? Gauges, SST Case with Brass Internals - 1

Liquid Filled Gauges Model 1555 and 1558 4" Gauges, SST Case with Brass Internals Model 1555 and Model 1558 4" liquid filled gauges combine low cost and high accuracy with a rugged stainless steel case and brass internals for corrosive and high vibration environments. Typical applications include: pumps, compressors, HVAC, petrochemical processing, and power generation. The 4" design is available in stem (Model 1555) or panel mount (Model 1558) configurations with brass socket; phosphor bronze Bourdon tubes specific customer vacuum, compound, pressure ranges Glycerin is standard fill fluid, with silicone or mineral (unfilled) gauges can also be supplied, off-the-shelf by your local stocking Ametek-U.S. Gauge 300 Series stainless steel, solid back case with stainless steel crimped ring. BUNA-N® multi-function plug with removable nipple for venting, pressure relief, and liquid fill access For Panel Mount Units: Incorporate 3-hole stainless steel front mounting flange WINDOW: Polycarbonate, sealed to case with a polychloroprene gasket DIAL: White aluminum with black markings POINTER: Black aluminum MOVEMENT: Brass BOURDON TUBE: Phosphor bronze SOCKET CONNECTION: Brass RESTRICTOR: Brass, push type .015" RANGES: Vacuum 30"-0 Hg VAC (counterclockwise rotation with increasing vacuum) LIQUID FILL: Glycerin is standard but silicone and mineral oil are available. Dry (unfilled) gauges are available as off-the-shelf stock through local distributors LOW PRESSURE VENT PLUG Vent plug with pop-up pin is used for all low pressure gauges, from 30" Hg to 30 psi. For gauges in pressure ranges of 60 piece black BUNA-N® plug is MODEL SELECTION CHART NUMBER MOUNTING CONNECTION SOCKET BOURDON TUBE CASE RING 1555 Stem 1/4"NPTLM Brass Phosphor Bronze Stainless Steel SST Crimped 1558 Front Flanged Panel 1/4"NPTCBM Brass Phosphor Bronze Stainless Steel SST Crimped © 2008, by AMETEK, Inc. All rights reserved. On-line fax: 215-323-9450 or e-mail to usg.sales@ametek.com Sales/Technical Support: 215-257-6531 Customer Service: 727-536-7831 900 Clymer Avenue 8600 Somerset Drive Specifications are subject to change without notice. Visit our Web site for the most up-to-date information.

Open the catalog to page 1

1555 and 1558 4? Gauges, SST Case with Brass Internals - 2

Liquid Filled Gauges Model 1555 and 1558 4" Gauges, SST Case with Brass Internals Lower Mount Front Flange Center Back Mount DIAL SIZE UNIT I SPEC NUMBER SELECTION CHART All gauges are stocked dry at our worldwide distribution center For factory liquid filling please add the following letters after the spec number when ordering: LG - for liquid-filled with glycerin LS - for liquid-filled with silicone LM - for liquid-filled with mineral oil O 2008, by AMETEK, Inc. All rights reserved. On-line fax: 215-323-9450 or e-mail to usg.sales@ametek.com Sales/Technical Support: 215-257-6531 Customer...

Open the catalog to page 2