Catalogs >
AMETEK Land >
Lancom 4 portable flue gas analyser

Lancom 4 portable flue gas analyser
8Pages

Add to favorites

Catalog excerpts

PORTABLE FLUE GAS MONITORING W W W. L A N C O M 4 . C O M

Open the catalog to page 1

AMETEK LAND HAS BEEN MANUFACTURING PRECISION MEASURING EQUIPMENT SINCE 1947. WE ARE SPECIALISTS IN NON-CONTACT TEMPERATURE MEASUREMENT AND COMBUSTION MONITORING WITH APPLICATIONS ACROSS DIVERSE INDUSTRIES SUCH AS STEEL AND GLASS MAKING, POWER GENERATION AND CEMENT MANUFACTURE. As part of AMETEK Process & Analytical Instruments Division since 2006, our customers benefit from the worldwide AMETEK sales and service team

Open the catalog to page 2

SIMPLICITY IS BUILT IN SET-UP AND MEASURE IN MINUTES; THE LONG LIFE BATTERY LASTS 8 HOURS ON A SINGLE CHARGE; INTEGRAL SAMPLE CONDITIONING - ALL IN ONE BOX.

Open the catalog to page 3

SPECIFICATION & DESIGN HIGH COLOR DISPLAY New high resolution color display supports a multilingual, simple user interface. FLUE GAS & AMBIENT TEMPERATURE The analyser takes a direct thermocouple temperature measurement of the flue gas, and has an ambient temperature sensor fitted. These are required for making accurate combustion efficiency calculations. EASY ACCESS SENSORS Each sensor is installed in its own unique position. Replacing a sensor is a simple process and takes only a few minutes. Unclip the side panel for access, swap the sensor and re-calibrate. STRAIGHTFORWARD SERVICING...

Open the catalog to page 4

FILTERING OUT DAMAGING CHEMICALS - PROLONGING SENSOR LIFE The sample gas is routed to the sensor manifolds, after removing flow and pressure variations. To ensure that the CO and CxHy sensors are not contaminated by other gases the sample gas is fed through a chemical filter prior to being routed to these sensors. This action prolongs sensor life and improves measurement accuracy. AUTOMATIC SENSOR PROTECTION To protect the CO Low sensor from excessive levels of CO (normally levels >2000 ppm), the system automatically switches to the high range CO sensor (up to 40,000 ppm if fitted). The CO...

Open the catalog to page 5

SAMPLE PROBES A WIDE RANGE OF SAMPLE PROBES SUITABLE FOR SPECIFIC APPLICATION AND MEASUREMENT REQUIREMENTS ARE AVAILABLE. 1: DrySampler Probe • The first truly portable sample dryer probe, incorporating a revolutionary design. (US Patent No. 6782767) • No electrical power required • No heated sample line required • Removes moisture from sample gas at the probe, giving the most accurate, reliable analysis of soluble gases • Low cost 2: Standard Probe Suitable for most applications. High quality, stainless steel probe with a sintered, replaceable filter tip and an adjustable collar to control...

Open the catalog to page 6

PORTABLE FLUE GAS MONITORING SPECIFICATIONS Display: Full function color LCD with backlight, wide QVGA display Tactile membrane (integral with display) function keys and cursors LED for ON (Power), Stand-by, Charge, Low Battery, Fault Power Supply: 50-60 Hz, 30 Watts. Battery, rechargeable lead-acid (internal). 95-265 V AC, Typical 8 hour operation, dependent on options fitted Ambient Temperature: Medium density blended polyethylene Standard Accessories: I ntegral Water Catchpot and Filters Battery Charger Supply Data Logging Insight Data Acquisition Software (free download) Wake and Sleep...

Open the catalog to page 8

Lancom 4 portable flue gas analyser 8Pages

Catalog excerpts

All AMETEK Land catalogs and technical brochures

Lancom 4 portable flue gas analyser
8Pages