Text version of the page

SLC Series Loadcells for DFS-R-ND Series

Specifi cation Sheet SS-FM-3015-0506May 2006 The CHATILLON
® SLC Series loadcells are full-bridge strain gauge sensors complete with 15-pin plug. These loadcells are used exclusively with the Chatillon DFS-R-ND Series digital indicator. The loadcell values and sensitivity factors are stored in memory within the sensor plug. When connected to a DFS-R-ND indicator, the capacity and calibration points are automatically recognized by the instrument. The instrument then becomes a full-featured load measurement instrument. The loadcells are connected to the DFS-R-ND with a retractable cord that extends fully to nearly 9 ft. (3 m).
Remote Sensors- Load Measurement DFS-R-0200 with Dedicated SLC Sensor Model ozf gf lbf kgf N Defl ection Accuracy SLC-250G 8 x 0.002 250 x 0.05 0.5 x 0.0001 0.25 x 0.0001 2.5 x 0.0005 0.013 +0.004 +0.25% SLC-0002 32 x 0.005 1000 x 0.1 2 x 0.0002 1 x 0.0001 10 x 0.001 0.013 +0.004 +0.25% SLC-0010 160 x 0.02 5000 x 0.5 10 x 0.001 5 x 0.0005 50 x 0.005 0.013 +0.004 +0.25% SLC-0025 400 x 0.05 10,000 x 1 25 x 0.002 10 x 0.001 100 x 0.01 0.015 +0.004 +0.25% SLC-0050 800 x 0.1 25,000 x 2 50 x 0.005 25 x 0.002 250 x 0.02 0.006 +0.003 +0.25% SLC-0100 1600 x 0.2 50,000 x 5 100 x 0.01 50 x 0.005 500 x 0.05 0.008 +0.003 +0.25% SLC-0200 - - 200 x 0.02 100 x 0.01 1000 x 0.1 0.008 +0.003 +0.25% SLC-0500 - - 500 x 0.05 250 x 0.02 2500 x 0.2 0.008 +0.003 +0.25% HighLow SLC-1000 - - 1000 x 0.1 500 x 0.05 5000 x 0.5 0.012 +0.003 +0.25% SLC-2000 - - 2000 x 0.2 1000 x 0.1 10000 x 1 0.018 +0.003 +0.5% SLC-5000 - - 5000 x 0.5 2500 x 0.2 25000 x 2 0.013 +0.003 +0.5% SLC-10000 - - 10000 x 1 5000 x 0.5 50000 x 5 0.011 +0.003 +0.5% Specifi cations Input Resistance: 1000 ohms +100 Output Resistance: 1000 ohms +100 Rated Output: 2.0 mV/V Safe Overload: 150% Full Scale Non-Linearity: +0.05% Full Scale Hysteresis: +0.05% Full Scale Zero Balance: +1.0% Full Scale Operating Temp: 30

°

to 120

°

F (-40

°

to 82

°

C)