Series 9100 - Accessories for FP Industrial temperature sensors The 9100 series consists of industrial thermocouples, measuring inserts manufacturer, thermowells and protective tubes. Connection fittings manufacturer, compensation cables manufacturer, thermocouple wires, industrial transmitters and local industrial display. 9107 - Industrial thermocouple for AMK/AKK/AK/BMK/BK, precious and non-precious metal. For installation/exchange in our standard thermocouple assemblies 9108-01 - Type TK80/115/125/TS85 - Measuring insert T, inserts for thermocouple assemblies. For installation/exchange in protective tubes and thermowells 9108-02 - Type MKM/M40/MK60 - Measuring insert M, inserts for resistance industrial thermometers. For installation/exchange in protective tubes and thermowells 9111 - Protective tubes and thermowells for thermocouple and resistance assemblies Types: - Protective tubes in ceramic and steel - Thermowells for weld-in (drilled from bar stock) and screw-in pockets (fabricated) 1913 - Process connection, Adjustable compression fittings and flanges for connecting industrial sensors with adjustable attachment to the process Types: - Flanges in stainless steel - Compression fittings with ceramic industrial sealing - Flanges + industrial counter flanges in cast iron with ceramic sealing - Compression fittings with steel ferrule or Teflon olive 9150 - Extension and compensating cable between the thermocouple at the measuring point and an instrument with built-in cold junction compensation (reference point) Types: - Extension cable: Extension wires manufacturer of original materials are made of the same material as the accompanying thermocouple and can be used at a higher temperature than a compensating cable. The cable is designated with an X after the thermocouple type, e.g. JX - Compensation cable: Compensation wires of substitute materials consisting of alloys, which, within a limited temperature range, have the same thermoelectric properties as the accompanying thermocouple. The cable is designated with a C after the thermocouple type, e.g. KC - Wide range of industrial insulation materials and wire sizes. The choice depends on the application such as ambient temperature and distance. There are also types with electrical screen and steel braiding for extra mechanical protection 9152 - Thermocouple wire, insulated and bare wires used for manufacturing thermocouples according to all standard combinations in IEC 584 Types: - Bare thermocouple wire: The maximum temperature stated depends on many factors such as ambient atmosphere, type of installation and diameter etc. The limits are for mechanically unloaded thermocouple wires under continuous use in air not contaminated by noxious gasses - Insulated thermocouple wire: The temperature limits indicated apply to the insulation materials FPM 4000 MONITOR MANUFACTURER 9168 - Type FPTU/FPTT/FPTM - Headmounted transmitters Conversion and linearization of thermocouples and Pt100 resistance thermometers signals into a temperature proprotional 4 -20 mA standard current signal Technical features: - 2-wire industrial transmitter - Input for TC, Pt100, ohm or mV www.jofra.com 11