video corpo

Belt driers and coolers
8Pages

{{requestButtons}}

Catalog excerpts

Belt driers and coolers - 2

Oat bran Wood shavings, wood pellets = heat exchange between product and air ¡ Evaporative cooling = removal of water from the product Cooling/drying is achieved according to the cross and counter-current principle, depending on the number of belts. For tests for design and projecting, a belt drier and a belt drier simulator are available in our own pilot plant. In the process, the air absorbs the moisture of Thus gentle drying is achieved. Due to the modular design units can be arranged the required respective Product shapes: ¡ Crumbles ¡ Pellets ¡ Briquettes ¡ Lumps ¡ Powdery products...

Open the catalog to page 2
Belt driers and coolers - 3

Expanded wheat semolina and rye Domestic waste Layers feed through the slots are conveyed to a separate outlet by brushes and then discharged. Lamellar plates are also available. subsequent increases in capacity are possible by extensions or additional storeys. ¡ Several standard widths are available. ¡ Special widths can be supplied. Parameters for design are for example the type of product, quantity, temper - ature, initial moisture, removal of moisture, condition of process air, type of heating. The retention time of the product is determined by the belt length and the speed range of the...

Open the catalog to page 3
Belt driers and coolers - 4

Maize Petfood Expandat® Graphite by-product 4 which must be cooled temperature, e.g. compound pellets, expanded products, pulp pellets, synthetic etc. which may be discharged at high temperatures, e.g. cat litter, charcoal briquettes, filter sludges, metal oxides etc. process air: up to 200 °C. Cooling Ambient air (or cooled process air) is drawn through one or more product layers. Drying and cooling Both processes take place in a single belt unit subdivided into independent drying and cooling sections and equipped with suitable heating and cooling devices. Drying and cooling with...

Open the catalog to page 4
Belt driers and coolers - 5

of emissions, for with low final temperature, feed, sewage sludge down to a low storage temperature, such as expanded and extruded products or those from hydrothermal treatment processing, FGD gypsum pellets etc. Special feed Layers feed pellets Expanded maize meal higher flow speed can be realized. Furthermore, the closely woven plastic belt filters the exhaust air. A system for cleaning this belt is integrated in the drier. Fish pellets

Open the catalog to page 5
Belt driers and coolers - 6

1170 870 2910 3040 1920 Width of the slotted plate mm 1150 1500 2000 Total width without drive mm 1400 1750 2250 Length per belt section mm 1920 1920 1920 *based on a layer level of 300 mm Intermediate aspiration. For the separation of the process sections, e.g. pre-cooling and post-cooling, pre-drying and post-drying, drying and cooling. Plastic fabric belt Slotted plates Chamber for drying and cooling 2680 4500 3415 27185 ±300 Connection side for the heat exchanger according to customer requirements Inlet 1440 2500 x 560 clear width 8 x 2880 = 23040 26275 Outlet Width of fabric belt mm...

Open the catalog to page 6
Belt driers and coolers - 7

Feeding devices Swivel box For insensitive products with high layer levels. Swivel chute For delicate products with different layer levels. Swivel screw For insensitive products requiring loosening and lump reduction. ¡ Loosening rakes ¡ Lump crusher ¡ Outlet box with ¡ Fines discharge ¡ Layer level indicator ¡ Remote layer- ¡ Temperature air and/or product ¡ Speed / standstill ¡ Belt speed control ¡ Layer level control ¡ On-line measurements product moisture outlet of the measurements temperatures moistures in provide the necessary for possible concepts ¡ Automatic belt ¡ Differential...

Open the catalog to page 7
Belt driers and coolers - 8

AMANDUS KAHL GmbH & Co. KG Dieselstrasse 5-9 D-21465 Reinbek / Hamburg Phone: +49 (0)40 727 71 - 0 Fax: +49 (0)40 727 71 - 100 info@amandus-kahl-group. www.akahl.de products, wood shavings, biomass, and chemical products.

Open the catalog to page 8

All AMANDUS KAHL catalogs and technical brochures

  1. PELLET MILLS

    9 Pages

Archived catalogs