catalogue search
P. 201
P. 202
P. 203
P. 204
P. 205
P. 206
P. 207
P. 208
P. 209
P. 210
P. 211
P. 212
P. 213
P. 214
P. 215
P. 216
P. 217
P. 218
P. 219
P. 220
P. 221
P. 222
P. 223
P. 224
P. 225
P. 226
P. 227
P. 228
P. 229
P. 230
P. 231
P. 232
P. 233
P. 234
P. 235
P. 236
P. 237
P. 238
P. 239
P. 240
P. 241
P. 242
P. 243
P. 244
P. 245
P. 246
P. 247
P. 248
P. 249
P. 250
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Design software, 3D software, Management software, CAD software, Software
Text version of the page
| If you want to cut, hatch or snap to an isometric circle, you must use the Modify ► Ellipse 2 Arcs function to convert it to twelve arcs. | ||||||||||||||
| Isometric Dimensions | ||||||||||||||
| 10T | ||||||||||||||
| When you dimension an isometric drawing, the witness lines are angled so that they are aligned with the lines being dimensioned. | ||||||||||||||
| 10>- | ||||||||||||||
| To dimension an isometric drawing, do the following: 1. Check the Isometric Grids option in the Settings ► Drawing Settings dialog box. 2. Select the Annotate ► Slope Dimension option. Answer YES to the prompt: Do you want dimension at fixed angle When you are asked to enter the bearing, type "30", "330" or "90" -the angle of the line you are going to dimension. Because you have checked the Isometric Grids option, you will be asked whether you want witness lines to be angled at 60 or 120 degrees. | ||||||||||||||