Text version of the page

FMT-100WT

Digital Force Gauge for terminal connections

Features

• For tensile strength testing of wire terminals in accordance with BS, EN, DIN, IEC, UL, SAE and MIL standards • Simple to use with automatic peak value recording, very high accuracy and reproducibility of measurement results • Battery operation possible using integrated NiCd-accumulator (rechargeable) • Solid design for quality control applications in laboratories and in production facilities

Details

This instrument is designed for measuring tensile strength of soldered or solder-free cable joints with end sleeves, pins, solder pins or similar wire terminal components. With its measuring range of 0...500N it is possible to test wires with cross sections between 0,05mm² (AWG 30) and 10mm² (AWG 8). Test samples are inserted into the receptacle adaptor, which has 12 different slot widths (from 0.5mm to 6.0mm), covering all the prevalent wire strengths and terminal types. The traction force is applied by an easy gliding lever system which simultaneously clamps the wire and creates a consistent pull with minimal effort. The traction force is collected at an accuracy of +/-0,5% and is shown on the display at a resolution of 0,1N. The peak value, at which the cable is torn, will be automatically saved in the memory.