T-A® Deep Hole Drilling - Allied Maxcut Engineering - #51

Text version of the page

® 8 Series Drill Inserts Diameter Range: 101.63 to 114.48mm 49 Ø Inch Ø mm Ø Decimal AM200® Stk. TiN Stk. TiAlN Stk. TiCN Stk. 4164” 102.00 4.0157” 138H-102  138T-102  138A-102  138N-102  4116” 103.19 4.0625” 138H-0402  138T-0402  138A-0402  138N-0402  4332” 104.00 4.0945” 138H-104  138T-104  138A-104  138N-104  418” 104.75 4.1250” 138H-0404  138T-0404  138A-0404  138N-0404  106.00 4.1732” 138H-106  138T-106  138A-106  138N-106  4316” 106.36 4.1875” 138H-0406  138T-0406  138A-0406  138N-0406  4¼” 107.95 4.2500” 138H-0408  138T-0408  138A-0408  138N-0408  108.00 4.2520” 138H-108  138T-108  138A-108  138N-108  4516” 109.54 4.3125” 138H-0410  138T-0410  138A-0410  138N-0410  110.00 4.3307” 138H-110  138T-110  138A-110  138N-110  438” 111.13 4.3750” 138H-0412  138T-0412  138A-0412  138N-0412  112.00 4.4094” 138H-112  138T-112  138A-112  138N-112  4716” 112.71 4.4375” 138H-0414  138T-0414  138A-0414  138N-0414  114.00 4.4882” 138H-114  138T-114  138A-114  138N-114  4½” 114.30 4.5000” 138H-0416  138T-0416  138A-0416  138N-0416  T-A® HSS CPM-M4 Original P Steel N/mm2 M Stainless Steel N/mm2 K Cast and Ductile Iron N/mm2 N Non-ferrous Material N/mm2 S High Temperature Materials N/mm2 H Hardened Materials N/mm2 <1365 <940 <1020 <855 <990 <1365 For further information on Material, Hardnesses and Cutting Data, please refer to the Technical Section on page 54. Supplied in 1 piece packages. Guaranteed Application is our method of ensuring tooling and production performance is guaranteed within the specific range of criteria used on any individual application. For further information contact our Technical Department on +44(0) 1384 4009000 or by email at engineering@alliedmaxcut.com Guaranteed Application