GEN3SYS® - Allied Maxcut Engineering - #9

Text version of the page

® 7 Stk. - Stock Availability.  Stocked Items  Stocked in limited quantities  All other coatings are non-stocked standards. Advanced planning is recommended (5-6 weeks delivery) Sizes not shown (Non-Standard Diameters) are available in all coatings. When ordering, please follow the example shown below: Metric = 17.20mm AM200®, 17 Series = 5C217H-17.20 Material A (Diameter) Decimal Equivalent (mm) (inch) AM200® Item Number, Coating and Availability 0.6693 17.00 5C117H-17  0.6719 17.07 4364” 5C117H-.671  0.6875 17.46 1116” 5C117H-0022  0.6890 17.50 5C117H-17.5  0.7030 17.86 4564” 5C117H-.703  0.6693 17.00 5C217H-17  0.6719 17.07 4364” 5C217H-.671  0.6875 17.46 1116” 5C217H-0022  0.6890 17.50 5C217H-17.5  0.7030 17.86 4564” 5C217H-.703  Drill Inserts Stk. K35 (C1) K20 (C2) Style TORX Plus Screws 10 Pieces Nylon Locking TORX Plus Screws 10 Pieces TORX Plus Hand Driver Preset Torque TORX Plus Hand Driver Replacement TORX Plus Tips Drill Range Used With TORX Plus Screws Admissible Tightening Torque (in.-lbs) Drill Range Used With TORX Plus Screw Admissible Tightening Torque (N-cm) Inch Metric 17 72567-IP8-10 72567N-IP8-10 8IP-8 8IP-8TL 8IP-8B 0.669-0.708 15.5 17.00-17.99 175 Supplied in 1 piece packages. Tightening torques are calculated with a friction coefficient of ì = 0.14 and developes 90% of ultimate yield strength Supplied in 10 piece packages. Replacement TORX Plus Screws 17 Series Drill Inserts and Holders Diameter Range 17.00mm to 17.99mm Holders Style Diameter Item Number Shank Diameter (mm) Shank Length (mm) Drill Depth (mm) Flat Body Length (mm) Overall Length (mm) Pipe Tap A B C D E F 60317S-20FM 20 42.0 54.0 Yes 84.1 126.0 18” 60517S-20FM 20 42.0 90.0 Yes 120.0 162.0 18” 60717S-20FM 20 42.0 126.0 Yes 156.0 197.9 18” 60317H-20FM 20 42.0 54.0 Yes 84.1 126.0 18” 60317H-20CM 20 42.0 54.0 No 84.1 126.0 18” 60517H-20FM 20 42.0 90.0 Yes 120.0 162.0 18” 60517H-20CM 20 42.0 90.0 No 120.0 162.0 18” 60717H-20FM 20 42.0 126.0 Yes 156.0 197.9 18” 60717H-20CM 20 42.0 126.0 No 156.0 197.9 18” Straight (Lathe) Helical (Machining Centre) 3x 3x 5x 7x 5x 7x Straight Fluted Design Helical Fluted Design