AccuPort 432® - Allied Maxcut Engineering - #9

Text version of the page

Tube Dash No. Port Thread Size Port Contour Cutter Number Stk. Minor Dia. mm Spotface Dia. W/ridge mm Seal Angle Seal Angle Dia. mm Seal Angle Length mm Reference Length mm Spotface to Shoulder Length mm Shank Dia. mm Shank Length mm OAL mm Port Standards: SAE J-1926-1/ISO 11926-1, and MS-16142 With extended minor diameter lengths (see column L1) AccuPort 432® ® 7 Stk. - Stock Availability.  Stock Item.  Stocked in limited quantities, advanced planning is recommended  Non-Stocked Standard. Normal delivery 5 to 6 weeks L5 L3 L4 D B L2 L1 A Seal C Angle L6 L6 L5 L3 L4 E L2 L1 A B C D Seal Angle Tube Dash No. Port Thread Size Port Contour Cutter Number Stk. Dia. mm Minor Dia. Length mm Pilot Dia mm Pilot Length mm Seal Angle Dia mm Spotface Dia mm Spotface to Shoulder Length mm Total Head Length mm Shank Dia mm Shank Length mm OAL mm Seal Angle - 4 7/16-20 UNJF-3B AS5202-04Y-063F  9.8 9.9 16.79 11.53 2.11 60° 14.34 22.23 22.76 41.58 15.88 47.63 89.20 - 5 1/2-20 UNJF-3B AS5202-05Z-063F  11.45 11.5 16.79 13.13 2.11 60° 15.88 23.27 22.39 41.58 15.88 47.63 89.20 - 6 9/16-18 UNJF-3B AS5202-06Z-075F  12.85 12.95 18.14 14.73 2.11 60° 17.46 24.87 28.43 49.28 19.05 50.01 99.29 - 8 3/4-16 UNJF-3B AS5202-080-075F  17.46 17.5 21.31 19.53 2.39 60° 22.23 30.43 28.57 53.52 19.05 50.01 103.53 - 10 7/8-14 UNJF-3B AS5202-101-100F  20.35 20.5 23.75 22.76 2.72 60° 25.46 34.39 30.19 58.17 25.40 57.94 116.10 - 12 1 1/16-12 UNJ-3B AS5202-122-125F  24.8 25.0 27.15 27.58 3.18 60° 31.42 41.53 37.94 70.23 31.75 57.94 128.17 - 14 1 3/16-12 UNJ-3B AS5202-142-125F  28.0 28.17 27.15 30.76 3.18 60° 34.61 45.09 37.22 70.23 31.75 57.94 128.17 - 16 1 5/16-12 UNJ-3B AS5202-162-125F  31.15 31.34 27.15 33.93 3.18 60° 37.77 48.77 36.51 70.23 31.75 57.94 128.17 - 20 1 5/8-12 UNJ-3B AS5202-203-150F  39.0 39.29 28.47 41.86 3.18 60° 45.69 57.91 44.32 80.95 38.10 68.28 149.23 - 24 1 7/8-12 UNJ-3B AS5202-243-150F  45.5 45.64 28.75 48.21 3.18 60° 52.07 65.28 42.58 80.95 38.10 68.28 149.23 - 32 2 1/2-12 UNJ-3B AS5202-324-150F  61.3 61.49 34.87 64.11 3.18 60° 67.97 88.65 45.78 93.65 38.10 68.28 161.93 Dia. mm A1 A2 L1 B L2 C L2 L3 L4 D L5 L6 A1 = AND10050 Specifications A2 = SAE AS5202 Specifications Port Standards: SAE AS5202 (Formerly UNJF-30 MilSpec MS-33649) Also conforms to UNF AND10050 Using Alternate Tap Drill Diameter (see column A1) - 4 7/16-20 UNF-2B X1926-04Y-063F  9.8 20.3 21.4 12° 12.5 2.7 45.1 22.8 15.9 47.6 92.8 - 5 1/2-20 UNF-2B X1926-05Z-063F  11.5 20.3 23.0 12° 14.1 2.7 45.1 22.4 15.9 47.6 92.8 - 6 9/16-18 UNF-2B X1926-060-075F  13.0 21.8 24.6 12° 15.7 2.7 53.5 29.0 19.1 50.0 103.5 - 8 3/4-16 UNF-2B X1926-080-075F  17.5 23.8 30.7 15° 20.7 2.7 56.7 29.2 19.1 50.0 106.7 - 10 7/8-14 UNF-2B X1926-101-100F  20.5 26.3 34.0 15° 24.0 2.7 60.7 30.1 25.4 57.9 118.6 - 12 1 1/16-12 UN-2B X1926-122-125F  25.0 29.3 42.1 15° 29.2 3.5 73.4 38.9 31.8 57.9 131.3 - 14 1 3/16-12 UN-2B X1926-142-125F  28.0 29.3 45.3 15° 32.4 3.5 73.4 38.2 31.8 57.9 131.3 - 16 1 5/16-12 UN-2B X1926-162-125F  31.2 29.3 48.5 15° 35.6 3.5 73.4 37.5 31.8 57.9 131.3 - 20 1 5/8-12 UN-2B X1926-203-150F  39.0 29.3 58.7 15° 43.6 3.5 84.1 46.6 38.1 68.3 152.4 - 24 1 7/8-12 UN-2B X1926-243-150F  45.5 29.3 65.0 15° 49.9 3.5 84.1 45.2 38.1 68.3 152.4 - 32 2 1/2-12 UN-2B X1926-324-150F  61.5 29.3 88.0 15° 65.8 3.5 103.2 60.8 38.1 68.3 171.4 Minor Dia. Length mm A L1 B C L2 L3 L4 D L5 L6 A A