Safety Lock-out Valve - ALKON - #1

LOC-MASTER

SAFETY LOCK OUT & EXHAUST AIR VALVES MANUAL & ELECTRIC

SIZES AVAILABLE: 3/8, 1/2, 3/4, 1, 1 1/4, 2 & 2-1/2" NPTF

Push handle in and one quarter turn to detent - inlet open to outlet, exhaust blocked.

One quarter turn of operating stem from detent position allows valve to spring return, shutting off supply and simultaneously exhausts downstream air not trapped by some other system component

Operation- Quick Loc-Master (QLM) Quick Loc-Master with ball handle operates same as above (LM) except actuation and de-actuation take place in 45^o increments to allow for even quicker shut off.

Slow Loc-Master is designed to allow operator to control rate of air flow when charging or exhausting a pneumatic system. Three full turns of knob are required to open valve fully and three full turns in opposite direction to close valve and exhaust downstream air. After system is charged, valve should always be placed in full open position for best operation.

• 0 - 150 psig

• 40 Micron Filtration

• Viton Seals

• 40^o to 180^oF

Loc-Master has long been industry's first choice in safety bleed valves; available in 3/8, 1/2, 3/4, 1 & 1-1/4 NPTF sizes. All valves have telescoping handle and provision for locking in off position only.