FCA3000

Three Channels Rogowski Current Industrial converter

Three Rogowski Coils Input Channels Three True RMS DC Outputs One DC Output for Channels Sum 0 ÷ 20 mA, 4 ÷ 20 mA Output or Other Values on Request Jumper Selectable Response Time Suitable for Three-Phase Systems 3000A Standard Full Scale Value Customizable Full Scale up to Hundreds kA Wide Power dispensing Range: from 80 to 260 V
AC or 19 to 60 V
DC Compact 9 DIN Modules Size General Description Benefi ts
FCA3000 is a three-channel current converter with DC outputs. It converts the values measured by a Rogowski coil into true RMS value. FCA3000 can be used with any kind of Rogowski coils: rigid and fl exible, according to the application. •
The fourth output corresponds to the sum of the three current channels; in three phase systems it represents the system value.• The equalisation of the Rogowski coil signal guarantees the same output value at different electrical network frequencies.• FCA3000 allows to select by jumper different output response time values. That makes it suitable to a large number of applications.• The combination of three current channels and the power supply unit in the same box make it very compact and simplifies the connections, allowing time and space saving.• The DIN Rail case offers an easy and quick installation. The coils can be connected directly to FCA3000 without any adapter, because the FCA3000 integrates the input signal, shifting it by 90°. FCA3000 has three indipendent inputs channels, suitable for three transducers, and four DC outputs.The standard input value is 100mV/kA with a full scale of 3000A. On request it is possible to supply different values.The fi rst three outputs correspond to each transducer, the forth gives the sum of the three current channels. The FCA3000 enclosure is a 9 module DIN Rail for fast installation. FCA3000 can be used as current measurement interface with industrial devices Applications
such as PLC SUPPLIER, SCADA systems, protection systems, control systems, metering equipments etc.Due to its specifi c features, fl exible Rogowski coil is an extremely confortable solution for current measurement and can be used in a number of cases where traditional • True RMS current measurement• PLC interface • Power Monitoring & Control Systems • Individual Device loading• SCADA systems • Very high current measurement
current tranducers is not the adequate solution. ENERGY MEASUREMENT AND CONTROLwww.algodue.com