UPM310 - LED DIN 96x96 Power Meter - 4 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

Network Analyzers Network Analyzers DIN 96 cutout for new or retrofit applications Fully bi-directional four quadrants readings Neutral current monitoring Up to 2 optional plug-in boards Large and bright LED alphanumeric display Power and current demand calculation during user-definable time period THD and individual FFT harmonic analysis up to 31st order Programmable Min/Avg/Max & energy data logging » General description UPM310 is a multifunction metering device suitable to measure the electrical parameters. It provides accurate True RMS measurements on bright LED display, or via serial communication port. The WINTOOL software can be downloaded for free from Algodue web site and allows to show on a PC all the measured values and to carry out settings in a faster way. The power meter replaces multiple existing analog meters as well as all single function meters or transducers. The powerful capabilities offered by the instruments make it ideal for stand-alone metering or energy management systems. UPM310 offers a compact unit making it suitable for new installations as well as retrofit applications. The power meter fits in DIN96 square cutouts. The modularity and the upgrade path allow a low initial investment, but as well, to meet future needs. These features allow to build specific meter configurations as required. UPM310 provides hundreds of accurate True RMS metering values at low cost. It provides peak average current and power demand information. This data is essential to work out proper strategies aimed at avoiding uncontrolled power peaks and consequent penalties. Being ultra-compact with flexible mounting, UPM310 is suitable for replacing conventional meters. It fits in DIN96 cutout allowing retrofit to existing equipment. UPM310 allows time and cost saving on mounting, compared to many individual single-function instruments. Via communication port it is possible to read and log on a PC all the readings and download the stored data. The recorded data allows to generate on a PC consumption profiles, logged value trends, cost allocation and reports as well as to identify critical values. Switchboards, gensets, motor control centers, etc. Power monitoring & control systems Individual machine load monitoring Demand management Harmonics monitoring Remote metering and cost allocation » Related Products • • • Dedalo Software Wintool Software AO plug-in board (2

 Open the catalogue to page 1

Network Analyzers » Main features • • • • • • • • • • • • • • • • • • • • • Three-phase 3-wire or 4-wire unbalanced load operation. True rms metering provides accurate measurement even for distorted waveform. Fully bi-directional, four-quadrant readings. Volts, Amps, Power, PF, Frequency, Energy, Demand and more. Individual & total harmonic distortion for voltage and current up to the 31st order. Direct measurement up to 600 (750) VAC. Programmable 1A / 5A current full scale. Two slots for optional AO plug-in boards (up to no. 4 analog outputs 0-20 or 4-20 mA). On-board memory 128 kB non-volatile...

 Open the catalogue to page 2

Network Analyzers » Specifications POWER SUPPLY Rated voltage: Consumption: VOLTAGE INPUTS Maximum measurable voltage: Input impedance: Burden: Frequency: CURRENT INPUTS (TRMS) Rated current (Ib): Min / max measurable current: Maximum overload: Input impedance: Burden: Insulation voltage: 1 / 5 A programmable 20 mA / 7A 10 A continuous - 100 A for 1 sec 0.02 Ohm approximately 0.5 VA max per phase 150 VAC max between phases TYPICAL ACCURACY Voltage: Current: Active power: Power factor: Active energy: Frequency: ±0.1% reading ±0.03% full scale ±0.1% reading ±0.05% full scale ±0.5% reading ±0.1%...

 Open the catalogue to page 3

LEGEND SELECTABLE COM PROTOCOL: A2 ASCII/MODBUS user selectable. The instrument is factory preset on the protocol checked in the table. 2 digital outputs for alarm or pulse emission. Analog outputs for real time parameter variation transmission. The output number changes according to the model (see table). Software for instrument remote management, downloadable for free at www.algodue.it, in the Client protected area. NOTE: Subject to change without notice algoduef '“'ELETTRONICA Innovative Electronic Systems

 Open the catalogue to page 4

All Algodue Elettronica catalogues and technical brochures

  1. UEC40 UEM40

    4 Pages

  2. UEM1P5

    4 Pages


    2 Pages

  4. CT catalogue

    14 Pages

  5. Company profile

    12 Pages