[Presentation] PQM4000 and PQM4000RGW - 18 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

Catalogue excerpts

PQM4000 and PQM4000RGW Class A DIN 192x144 power quality analyzer Class A certified for CTs or current clamps (PQM4000) with Rogowski coils (PQM4000RGW)

 Open the catalogue to page 1

PQM4000 Class A DIN 192x144 power quality analyzer for CTs or current clamps Class A certified in compliance with IEC/EN 61000-4-30:2015 Ed. 3

 Open the catalogue to page 2

algodue ^ELETTRONICA iw\.)A.ov)OvVtU£. bl&cVrowte Class A DIN 192x144 power quality analyzer with Rogowski coils Class A certified in compliance with I EC/EN 61000-4-30:2015 Ed. 3

 Open the catalogue to page 3

POM4000 and 4000RGW are connected to networks and facilities to monitor: Power quality Critical processes even in remote mode Harmonics and interharmonics in cases of power quality problems Type and timing of faults on energy supply Power quality standards according to EN 50160 and issuing a printable report

 Open the catalogue to page 4

HIGHLIGHTS Quality analysis according to Class A EN61000-4-30: 2015 Measurements of harmonics and interharmonics according to EN61000-4-7 Flicker measurement according to EN61000-4-15 and IEEE1453 Transients capturing Communication, management and monitoring measuring remotely via ETHERNET High data recording capacity 16GB Touch screen graphic functions

 Open the catalogue to page 5

« Voltage and current additional channels compared to other three phase devices on the market: up to 9 channels, 4 voltage inputs and 5 current inputs ■ PQM4000: current inputs for CT or current clamps to ensure the accuracy of measurement « PQM4000RGW: current inputs for MFC150 Rogowski to ensure fast and ease of installation « Continuous monitoring of the metering parameters related to power quality for energy characteristics « Simultaneous recording of events, Min / AVG / Max values and energy meters in 16Gb memory ■ Various possibilities of data transmission: Ethernet, WIFI, Modbus RTU / TCP,...

 Open the catalogue to page 6

The instrument is for panel mount 192x144 DIN size. The instrument is provided with a touch screen display and an USB port on front panel. The USB port supports USB flash drives for data transferring (recorded data) or upload of device new firmware. Bundled USB pen drive supplied with installation kit for EN50160 analysis. The instrument is provided with two ETHERNET communication ports: 1 front port for a quick instrument connection to a PC 1 rear port for data reading and management in remote mode

 Open the catalogue to page 7

GENERAL FEATURES Back of the CT input version Inputs & Outputs The instrument is provided with digital inputs, outputs and analog outputs, refer to the following picture and description. PART FUNCTION M)    4 channels with 24 VDC optoisolated passive digital outputs for alarm tripping or pulse emission. (?)    4 channels with 24 VDC optoisolated digital inputs to acquire logical status ol control signals (D 4 channels with 4 ..20 mA analog outputs for real time parameter variation transmission. WIFI Port A WIFI port is provided for a quick instrument connection in wireless network. RS485 port...

 Open the catalogue to page 8

GENERAL FEATURES RECORDINGS: RECORDING TYPES The instrument can monitor the measurements and record different data according to the set recording type. Available recording types: ■ Events: event capture at threshold overtake; in case of fast frequency event, the event can be triggered also by manual mode ■ Min/Avg/Max: LOG recording containing the Min/Avg/Max values stored at a preset rate ■ Energy counter LOG: LOG recording containing the energy counters stored at a preset rate ■ Inputs LOG: recording containing digital input status changes ■ Functional LOG: LOG recording containing instrument...

 Open the catalogue to page 9

GENERAL FEATURES RECORDING FORMATS Fast voltage events    CSV, POD IF Fast frequency events*    CSV,    PODIF Fast U4 voltage events    CSV,    PODIF Rapid voltage changes    CSV Overcurrent events    CSV,    PODIF Slow voltage events    CSV Slow frequency events    CSV Flicker events    CSV Voltage TFID events    CSV Voltage unbalance ratio events    CSV Min/Avg/Max recordings    PODIF Energy counter LOG    CSV Digital inputs LOG    CSV *ln case of frequency transient, only the corresponding CSV and PODIF files are uploaded. CSV: Comma Separated Values PODIF: Power Quality Data Interchange Format algodue...

 Open the catalogue to page 10

GENERAL FEATURES GENERAL FEATURES Example of display page VOL TAGE FAST THREE EVENTS. The "VIEW"    Recording type menu icons allow the graphical display of event. By clicking on the icons under "View" you can view RMS graphics and waveforms.

 Open the catalogue to page 11

GENERAL FEATURES RECORDINGS: RECORDING FORMATS Example of Waweforms graphic.

 Open the catalogue to page 12

GENERAL FEATURES WEBSERVER Web server is the instrument web interface which allows to manage the instrument by any PC using a simple web browser. Example of a webserver real time page: GENERAL FEATURES The Web server graphic interface is the same displayed on the instrument touch screen. Both the instrument and the interface are multilingual.

 Open the catalogue to page 13

GENERAL FEATURES PQM-ANALYZER SOFTWARE Bundled software for analysis in accordance with the EN50160 data issuing a dedicated report.

 Open the catalogue to page 14

GENERAL FEATURES PQM-TOOL CLASS A MONITORING SOFTWARE TOOL PQM Class A Monitoring Tool is a software tool which provides the possibility to view and monitor all Voltage and Frequency parameters defined in the IEC 61000-4-30:2015 standard for Class A certification. The tool communicates with the PQM Power Quality Monitor family devices through Modbus TCP protocol, therefore the device must be connected through Ethernet. Available types of data: Magnitude and Frequency Under Deviation Over Deviation Mains Signalling Unbalance Flicker Harmonics Events RVC Download Data download screen: Download by...

 Open the catalogue to page 15

ORDER CODE POWER SUPPLY GPS module for RTC synchronisation, integrated in the instrument. 4 digital inputs for remote management of control signals. 4 digital outputs for alarm or pulse emission. 4 analog outputs for real time parameter variation transmission.

 Open the catalogue to page 16

ORDER CODE POWER SUPPLY GPS module for RTC synchronisation, integrated in the instrument. 4 digital inputs for remote management of control signals. 4 digital outputs for alarm or pulse emission. 4 analog outputs for real time parameter variation transmission.

 Open the catalogue to page 17

All Algodue Elettronica catalogues and technical brochures

  1. CT catalogue

    14 Pages

    En
  2. Company profile

    12 Pages

    En