PL-500SM-N SERIES Plastic Shell Auto-Coupling Connectors - Alden - (Version JPG) - PDF Catalogue | Technical Documentation

See other catalogues for Alden

High-voltage connector, Circular connector, Connector

Text version of the page

PL-500SM-N SERIES

Plastic Shell Auto-Coupling Connectors 14 pole capacity miniature circular connector for overmolding

CON N ECT

pl-500sm-n features

Ideal for front-panel instrumentation and hand-held equipment, the compact and cost effective PL-500 Series is designed to meet the efficient packaging demands of portable electronic devices

Packaging (intuitive, compact, configurable)

• Pulse-Lok® auto-latch / mating confirmation

• Miniature .520" diameter circular shell

• Up to 14 contact positions

• 14 standard color combinations

• Multiple and proprietary keying options

• Available as an overmolded cable assembly

• Custom configurations available

Performance (for harsh environments)

• Water proof (IP-67 rated)

• Steam, EtO, & Gamma sterilizable

• Chemical resistant housing

• Up to 5,000 mating cycles (with std. Contacts)

• Factory terminated, overmolded cable assemblies for enhanced flex and strain relief

pecifications

Mechanical

Mating Cycles: 20K cycles max Retention Force:

• Mated Connectors: 25 lbs. Minimum

• Cable to Connector: to 30 lbs. typical

Environmental

• Operating Temp: -20C to +85C

• Moisture Resistance: to IP-67 (encapsulated)

• Sterilizable: gamma, EtO & Autoclave

• Chem. Resistance: common OR cleaning solvents

Electrical (see below) Mating Life: 5,000 cycles min. Contact Resistance: < 10 milliohms*

Material

Connector Housing: Nylon 12 Flex Reliefs: Thermoplastic Rubber Contacts: Brass / BeCu, Gold Plate per MIL-G-45204

Backshell to Connector: Minimum

50 lbs.

' post conditioning

tablea?

standard contact configurations & specifications


Number of Poles	Contact Size Pin <) (mm)	Max Wire Gauge	Operating Voltage max	Operating Current Max	Contact Résistance
14	0.5	28	300 V RMS	.9 A	< 14m ohms
10	0.5	28	300 V RMS	1.2 A	< 14m ohms
8	0.7	22	300 V RMS	1.8 A	< 6m ohms
7	0.7	22	300 V RMS	2.1 A	< 6m ohms
6	0.7	22	300 V RMS	2.1 A	< 6m ohms
5	0.7	22	300 V RMS	2.4 A	< 6m ohms
4	0.7	22	300 V RMS	2.4 A	< 6m ohms
3	0.7	22	300 V RMS	3.0 A	< 6m ohms
2	0.7	22	300 V RMS	3.0 A	< 6m ohms
1	0.7	22	300 V RMS	3.0 A	< 6m ohms
1	1.5	16	300 V RMS	7.0 A	< 2m ohms

Up to 14 contact positions

Custom contact inserts are available. Consult factory.

standard housing options

Panel-Mount Receptacle Assembly

In-Line Receptacle Assembly

In-Line Plug Assembly

.520 <)

Mounts from back of panel to achievce an IP-67 seal

.320 typ

2.05

.625 f>

Panel thickness range = .063 to .125 Panel-Mount Receptacle

Shown with Overmolded Strain Relief (Refer to PL Series Overmolding Guide)

In-Line Plug Kit (for overmolding)

Shown with overmolded strain relief (Refer to PL Series Overmolding Guide)

In-Line Receptacle (for overmolding)

Rear Mount

-1.35-

Select this component from Table B

Connector housings are illustrated in blue with gray couplers and backshells. Standard color is black on black. See our online configurator for color options at: www.aldenproducts.com/configurator * All dimensions shown in inches except where indicated

Phone: 508-427-7000 Fax: 508-583-0164 www.aldenproducts.com

For additional information about this, or any other Alden product, please contact an Alden Products specialist today.

PL-500SM-N SERIES Plastic Shell Auto-Coupling Connectors - Alden - #1

High-voltage connector, Circular connector, Connector