PL-1200RG-N SERIES Plastic Shell Auto-Coupling Connectors - Alden - #1

Plastic Shell Auto-Coupling Connectors 78 pole capacity interconnect system

CONNECT OUTSIDE THE BOX

• Custom configurations available including passive and active devices for coding or limiting catheter usage

Performance (for harsh environments)

• Water proof

• Sterilizable

• Chemical resistant housing

• Up to 5,000 mating cycles (with std. Contacts)

• Factory terminated, overmolded cable assemblies for enhanced flex and strain relief

Packaging (intuitive, compact, configurable)

• Pulse-Lok" auto-latch / quick release mechanism confirms continuity in critical surgical applications

• 14 standard color combinations

• Proprietary keying protects your single-use from being copied, or mated with the wrong connector

Mechanical

Mating Cycles: 20K cycles max Retention Force (axial):

• Mated Connectors: 50 lbs. Minimum

• Cable to Connector: to 50 lbs. typical

• Backshell to Connector: 50 lbs. Minimum

Electrical (See Table A) Mating Life: 5,000 cycles min. Contact Resistance: < 10 milliohms*

Material

Connector Housing: Thermoplastic Flex Reliefs: Thermoplastic Rubber Contacts: Pins = Brass, Sockets = Bronze Alloy Gold Plate per MIL-G-45204C

Reusable Socket = 30 - 45u" Gold over 50 - 200u" Nickel strike Disposable Pin = 10 - 30u" Gold over 50 - 200u" Nickel strike

Environmental

• Operating Temp: -20C to +105C

• Moisture Resistance: to IP-67

• Sterilizable: steam, gamma & EtO

• Chem. Resistance: common OR cleaning solvents

Panel-Mount Receptacle Assembly

.290 typ -— IP-1 - .460 typ

Panel thickness range = .063 to .250

Panel-Mount Receptacle

Disposable Receptacle Assembly

-1.15 (|>

In-Line Plug Assembly

1.15 <)

Shown with optional backshell (See Table C)

Shown with Overmolded Strain Relief (Refer to PL Series Overmolding Guide)

In-Line Plug (for overmolding)

Disposable Receptacle

1.00

Select this component from Table B

Select this component from Table B

Select this component from Table B

Connector housings are illustrated in blue with gray couplers and backshells. Standard color is black on black. See our online configurator for color options at: www.aldenproducts.com/configurator * All dimensions shown in inches.