| The cell is manufactured in aluminium alloy with HT steel bushes. The cell incorporates an eight gauge bridge together with associated electronics and a 9 volt PP3 non-rechargeable battery. Built into the load cell is a large [20mm] 3.5 digit liquid crystal display mounted on the front of the cell for easy reading from the operator's position. The load cell is self contained and has no external cabling. A battery switch is provided on the rear of the cell to prolong battery life when the cell is out of use. All set up and calibration data is retained when switched off. The cell is automatically switched off after 15 minutes to prolong battery life. Battery life - typically 50 hours. |