Water Based P.T.F.E Release Agent - Airtech Advanced Materials Group - #1

CORPORATE HEADQUARTERS

5700 Skylab Road

Huntington Beach, California 92647

Phone: (714) 899-8100

Fax: (714) 899-8179

Internet: http://www.airtechonline.com

email: airtech@airtechintl.com

Page 5 3-27-97

DATA SHEET

Water Based P.T.F.E. Release Agent Non-Silicone, Non-CFC, Non-V.O.C., Non-Red Label

Safelease 30 is a water based P.T.F.E. release agent that contains no silicones or silanes. Safelease 30 can be used for cure cycles up to 450°F (232°C). Safelease 30 can be used on composite and metal tools and provides a superior release from epoxies, phenolics, BMI's and urethane resin systems. Safelease 30 does not attract moisture so steam does not develop on the mold surface during cures. Safelease 30 is the only water based release agent that works on composite molds without needing a sealer. One coat allows multiple releases. Safelease 30 is an air dry system. Heat cure is not necessary.

Note: Shake well prior to application.

1. Thoroughly clean and dry mold surface.

2. Apply one light coat with a lint free cloth or with conventional spray paint equipment. Adjust the spray nozzle and air pressure to produce a light mist.

3. Allow approximately 30 minutes drying time at room temperature.

4. Apply a light buff with a lint free cloth to remove any excess.

5. Mold is now ready for production.

Safelease 30 is capable of multiple release cycles with most resin systems. Removal

In the event of mold release buildup, Safelease 30 can be easily removed using Release Off 826. Refer to the Data Sheet for application instructions.

Material Safety Data Sheets are available for all Airtech products and should be consulted prior to use of product.

Packaging: 1 gallon containers (3.8 liters) 5 gallon containers (18.9 liters) 55 gallon drum (208 liters)

Shelf Life: One year when stored at 72°F (22°C). DO NOT FREEZE!

CATALOG POSITION: RELEASE LIQUIDS

As the conditions or methods of use are beyond our control, Airtech International, Inc. does not assume any responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use.