catalogue search
P. 01
P. 02
|
|
You may also be interested in
Grinder, Pneumatic grinder, Pneumatic regulator, Angle grinder, Straight grinder
Text version of the page
650 Series General Information
Mill at super high feed rates at governed constant 25,000,30,000,40,000 RPM.
CAT/BT30/40/50, DIN40, HSKA-63/A-80/40C Integrated Tool Holder Options Available.
Our workhorse with double front ceramic bearings standard.
Ultra low vibration and heat. No duty cycle.
Ideal for Trochoidal milling with small tools.
650 Models Dimensions - For more detailed specifications visit www.airturbinetools.com
|
JS |
HSK |
CAT/BT/DIN |
|
|
A |
1.01" (25.76mm) |
1.01 "(25.76mm) |
1.01" (25.76mm) |
|
B |
3.22" (81.79mm) |
3.22"(81.79mm) |
3.22"(81.79mm) |
|
C |
6.23"(158.22mm) |
7.24"(183.90mm) |
7.19"(182.63mm) |
|
D |
8.23"(209.02mm) |
9.63"(244.57mm) |
10.50" (266.67mm) |
650X Series I General Information
Powerful double turbine: 1.4HP / lkW with low heat and low vibration
(For max power use side airfeed, except on HSK).
Maintains high torque under load for high feed rates. Optimizes end mill performance.
Continuous toolpath engagement with constant feed rate.
Suitable for hard materials.
650X Models Dimensions - For more detailed specifications visit www.airturbinetools.com
|
JS |
HSK |
CAT/BT/DIN |
|
|
A |
T.01" (25.76mm) |
1.01 "(25.76mm) |
1.01" (25.76mm) |
|
B |
3.22"(81.79mm) |
3.22"(81.79mm) |
3.22"(81.79mm) |
|
C |
6.69"(169.90mm) |
7.70"(195.58mm) |
7.65"(194.31 mm) |
|
D |
9.69" (220.07mm) |
10.09" (256.25mm) |
10.96" (278.35mm) |
|
General Specifications |
650 Models |
650X Models |
|
Governed Speed RPM |
25,000 / 30,000 / 40,000 |
25,000 / 30,000 / 40,000 |
|
Power Rating HP (kw) |
0.76 (0.57) / 0.83 (0.62) / 0.88 (0.66) |
1.2 (0.90)/ 1.3 (.98)/ 1.4 (1.04) |
|
Inlet Air Pressure (clean dry air only) |
90 PSI (6,2 Bar) |
90 PSI (6,2 Bar) |
|
Air Consumption Idle cfm (l/s) |
13 (6.1) / 14 (6.6) / 14 (6.6) |
16 (7.56) / 17 (8.02) / 18 (8.49) |
|
Air Consumption Working Flow cfm (l/s) |
14 (6.60) -35 (16.5) |
19 (8.97) -30 (14.16) |
|
Sound Level |
Less Than 67 dBA |
Less Than 67 dBA |
|
Max Shank Capacity |
ERI 1 -1 IA' (6mm) |
ER11 -1/4" (6mm) |
|
Spindle Weight |
JS: 65.8 oz (1.95 kg) | CAT/DIN/BT/HSK: 11 2.8 oz (3.20 kg) |
JS: 75.2oz/2.13kg | CAT/DIN/BT/HSK: 118.4oz/3.34kg |
Q Mounting Options
|
Straight Shank (JS) |
|
|
3/4" or 20mm JS units combine with ER32 or other toolholders for infinite compatibility. |
|
|
Integrated Shank |
|
|
Ě |
For integrated shank mounting options select from CAT30/40/50, BT30/40/50, SK40, HSK-A63, HSK-A80 (650 only) and many other integrated options to provide rigidity. |
Toolchanger Mounting Assembly
Toolchanger assem-
bly and mounting
block compatible with
Haas, Fanuc Robodrill,
Brother, Mazak, and
most popular CNC/VMC
machines. Integrate
high speed in your
production.
Toolchanger Mounting Assembly
Automatically load AirTurbine Spindles™ in CNC machines with our wrap-around Toolchanger Mounting Assembly (TMA)
(patent pending). This option allows CNC tool-changers to automatically load/unload our family of high speed precision
spindles using a proprietary collar system and mounting block integrated to the right side of the CNC spindle in minutes.
The mounting block connects to a clean airline and solenoid. Filter extractor included with spindle.
Pre-machined spindle mounting blocks designed for popular CNC machines are available. A Universal block is available
for custom mounting applications. The TMA block remains on the CNC spindle for normal tool changes, even if not using
the AirTurbine Spindles™ as it will not interfere when using the main spindle. View videos and full installation Guide and
Kits at www.airturbinetools.com.
Due to AirTurbine Spindles™ center airfeed option, theTMA option is not required for automatic spindle changes on VMC's
where coolant channel can be used to supply sufficient CFM / L/S air flow. AirTurbine Spindles™ center airfeed can be
used if coolant channel has 1 /4" / 6mm internal diameter for 601 /602/625 models. Not suitable for 625X/650(X) models,
except all HSK spindles, including 625X and 650 Series, can be used with center airfeed if coolant channel has sufficient
internal diameter (3/8"/9mm required for 625X and 650). Coolant channel and connector tube must be purged and
cleaned before dry, clean 90 PSI / 6.2 Bar air is induced.
Toolchanger
Mounting Assembly
Block
Collar
T.I.R. Certificate
A certificate stating T.I.R. of
spindle taper, 3x I.D. of collet,
and vertical alignment
accompanies every spindle.
Distributor:
turbine tools'
the tools of a new generation"
1225 Broken Sound Parkway NW
Boca Raton, Florida 33487, USA
ˇnfo@airturbinetools.com
Ç^f turbine motors
the tools of a new generation"
Phone: +1-561-994-0500
Fax: +1-561-994-8097
www.airturbinetools.com
PROUD PARTNER OF
TEC
View installation information and installation kits at www.airturbinetools.com
Do not use couplings/hoses less than 1/4"/6mm internal diameter. With 625X, 650 and 650X units use a minimum 3/S"/9.5mm internal diameter coupling/hose.
Always use a 0.3 micron filter and/or extractor where required and check specified PSI or US air flow. Use 90 PSI/6.2 Bar clean, dry, oil-free air only. Use eye protection
and follow safety instructions. Supply is subject to Air Turbine Technology Ine, (ATT) distributor policies and upon terms contained in the ATT distributor agreement.
Subject to availability, change of specifications, price and terms without notice. All specifications approximate. ©2012 Air Turbine Technology, Inc. All rights reserved.
air
turbine spindles"
the tools of a new generation'
Constant High Speed and Torque
Air Turbine Spindles™
25,000RPM - 90,000RPM <1.4HP / 1.04kW
Patented governed high speed and
torque motor - maintains high speed
and high torque under load.
Direct drive with only two moving parts.
No vanes, gears or brushes to wear.
25,000 to 90,000 RPM up to 1.4HP / 1.04kW.
No duty cycle, low heat.
Totally oil-free, low friction powerful
motor - reliable in continuous 24/7
operation. Cooled by turbine air.
Efficient governed low air consumption.
Autochange option for VMC's for full
integration in CNC programs.
Substantially Reduced Cycle Times.
Negligible heat and thermal expansion.
www. a i ri urbi net o o is. com