Series AM100HB-UZ

100 Watt | Half Brick DC-DC Converter

FEATURES: RoHS compliant Regulated output Wide 2:1 Input range High efficiency Very low ripple and noise Operating temperature range: -40 to +85ºC On/Off Control and Trim Function 1500VDC I/O Isolation

Models Single output

Model Input Voltage (V) Output Voltage (V) Output Current max (A) Input Filter

AM100HB-2403S-UZ 18-36 3.3 20 type AM100HB-2405S-UZ 18-36 5 20 type AM100HB-2412S-UZ 18-36 12 8.3 L type AM100HB-2415S-UZ 18-36 15 6.7 L type AM100HB-2424S-UZ 18-36 24 4.2 L type AM100HB-2428S-UZ 18-36 28 3.6 L type AM100HB-2448S-UZ 18-36 48 2.1 L type AM100HB-4803S-UZ 36-72 3.3 20 type AM100HB-4805S-UZ 36-72 5 20 type AM100HB-4812S-UZ 36-72 12 8.3 L type AM100HB-4815S-UZ 36-72 15 6.7 L type AM100HB-4824S-UZ 36-72 24 4.2 L type AM100HB-4848S-UZ 36-72 48 2.1 L type AM100HB-11005S-UZ 66-160 5 20 type AM100HB-11012S-UZ 66-160 12 8.3 L type AM100HB-11015S-UZ 66-160 15 6.7 L type AM100HB-11024S-UZ 66-160 24 4.2 L type AM100HB-11048S-UZ 66-160 48 2.1 L type

NOTE: All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified.

Input Specifications

Parameters Nominal Typical Maximum Units

24 18-36 Voltage range 48 36-72 VDC 110 66-160 Remote Control CNTRL open or connect to +Vin On CNTRL connect to –Vin Off Logic Low 0.4 V Turn On Time 10 ms Start-up Delay Time 150 ms

Isolation Specifications

Parameters Conditions Typical Maximum Units

Tested I/O voltage 1 Min 1500 VDC Tested Input / Case Ivoltage 1 Min 500 VDC Tested Output / Case voltage 1 Min 500 VDC

Output Specifications

Parameters Conditions Typical Maximum Units

Set point accuracy ±1 % Trim range ±10 % Dynamic Response 200µs setting time 50-75% & 50-25% load 3% of Vout Pk deviation Short Circuit protection Continuous Short Circuit restart Auto recovery Over Temperature Protection >105 110 115
o C www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832)
F 054e R3.D 1 of 4
North America only