High-precision humidity sensor Type FHAD36R - AHLBORN - #1

Text version of the page

HUMIDITY 09.20 10/2009 We reserve the right to make technical changes. 09 www.ahlborn.com High-precision humidity sensor Type FHAD36R Wide range of temperatures ALMEMO® D measuring module for humidity and temperature ƒÓ Capacitive humidity sensor with integrated signal processor, for humidity measurement at the highest accuracy level ƒÓ Unique correction and adjustment process ƒÓ Digital output, i.e. all correction and sensor data saved in the sensor itself ƒÓ ALMEMO® connecting cable with digital ALMEMO® D measuring module. Cable extensions up to 100 meters and various connection methods see page 09.06 ƒÓ Four climate variables displayed Temperature, relative humidity, dew point, and function channels for mixture ratio, enthalpy ƒÓ Factory or DKD calibration is performed on the sensor alone. Fully accurate - irrespective of connecting cable and AMEMO® measuring instrument. ƒÓ Operation in sleep mode only possible with devices with sleep delay function (ALMEMO 2590-2/3S/4S, 2690-8, 2890-9, 5690, 8590-9, 8690-9A, with Update) Common technical data Operative range (depending on sensor type) Humidity measurement Sensor capacitive Measuring range 0 to 100 % RH Adjusted at 23 °C and 10%, 35%, 80% RH Accuracy at 23 °C ±0.8% RH Reproducibility 0.3% RH Long-term stability <1% RH per year Temperature measurement Sensor Pt100, 1/3 class B Measuring range -100 to +200 °C Accuracy at 23 °C ±0.1 K Reproducibility 0,05 °C Long-term stability <0,1 °C per year Operative range of the electronics in the sensor connector -40 to +100 °C in the grip (of hand-held sensors) -40 to +85 °C Sensor power supply via the ALMEMO device, approx. 12 mA Sensor connection on the sensor / sensor cable Plug connection (Materials: Anticorodal aluminum, anodized) IP65 ALMEMO® cable Length 2 or 5 meters Materials TPU, -40 to +90 °C fitted with ALMEMO® D plug Standard temperature / humidity sensor Type FHAD36RS Variants including factory test certificate Standard temperature / humidity sensor with plug connection including connecting cable with ALMEMO D connector Connecting cable, length = 2 meters Order no. FHAD36RS same Connecting cable, length = 5 meters Order no. FHAD36RSL05 Technical data Operative range -50 to +100 °C Sensor materials Polycarbonate Filter Polyethylene Response time <15 s at typical 1 m/s Accessories Brackets for wall mounting (see page 09.05) Order no. ZB9600W Filter Variants Filter cartridge = polycarbonate, filter = polyethylene, For standard applications, good response time, good protection against fine dust particles Order no. ZB9636PE Filter cartridge = polycarbonate, Filter = stainless-steel wire fabric, Quickest response time, Not suitable for environments that are bioactive or contaminated with fine dust particles (risk of congestion) Order no. ZB9636WM Filter cartridge = polycarbonate, filter = Teflon, Good protection against fine dust particles and salt (maritime environment), Slower response time Order no. ZB9636TF Other variants are available on request Miniature cable humidity sensor Diameter: 4 mm, -40 to +85 °C Humidity sensor with round penetrating tip Diameter 5 / 10 mm For taking measurements in loose bulk materials -40 to +85 °C Sensor with flat penetrating blade, 22 x 4 mm For taking measurements in paper or textile stacks -40 to +85 °C