Return-to-Agilent Agreement for i3070 In-Circuit Test Systems
4Pages

{{requestButtons}}

Catalog excerpts

Return-to-Agilent Agreement for i3070 In-Circuit Test Systems - 1

Return-to-Agilent Agreement for i3070 In-Circuit Test Systems As a manager in large ODMs and CMs who has invested in a large base of i3070s and 3070s and have trained your engineers to identify faults within i3070s, you have challenges to ensure your systems are working in a 24*7 environment. Whether you are working in the OEM or CEM environment, one of your key roles in test management is to ensure optimal 24-by-7 system uptime of your i3070 and 3070 ICT systems. Apart from training your engineers to identify possible unscheduled system downtime and trigger corrective actions, there are two key areas to look out for: a. Do you have enough stock of working cards? b. Do you have assurance that these cards are of good quality so that the systems do not go down after they have been deployed? With the Return to Agilent (RTA) agreement, you can have full control over costs, quality and availability of working cards. Defective parts are scheduled for repair at our ISO accredited Repair and Calibration center and returned to you in good working condition. The following parts are covered under RTA: ▄ Module cards (ASRU cards, pin cards, control cards) ▄ MPU ( module power supply) ▄ System cards

Open the catalog to page 1
Return-to-Agilent Agreement for i3070 In-Circuit Test Systems - 2

Assured repair quality We have reviewed many cards which have been repaired by third party service providers or repaired in-house - unfortunately, the quality of some of these reworked parts was far from satisfactory. Here are examples of poor quality you might encounter with some third party vendors: Broken trace Wrong component Poor soldering Poor repair quality affects the system reliability over the longer term, with test measurement accuracy being compromised, leading to lower product yield. Part of our RTA value is ensuring you get original and qualified parts for reliability and...

Open the catalog to page 2
Return-to-Agilent Agreement for i3070 In-Circuit Test Systems - 3

Why you should choose RTA Validation before delivery We use a complete suite of test and calibration equipment to ensure the repaired parts are fully restored to working order before delivering them back to you. Our i3070 calibration service is ISO 9000 compliant and we provide you with pre- and post- ASRU adjustment measurement reports. These calibration certifications are stored into our worldwide database, which helps you to track the system status based on serial number regardless where you may move your system to. Access to knowledge We have full access to a comprehensive knowledge...

Open the catalog to page 3
Return-to-Agilent Agreement for i3070 In-Circuit Test Systems - 4

www.agilent.com/find/systemsupport myAgilent myAgilent A personalized view into the information most relevant to you. Agilent Channel Partners www.agilent.com/find/channelpartners Get the best of both worlds: Agilent’s measurement expertise and product breadth, combined with channel partner convenience. For more information on Agilent Technologies’ products, applications or services, please contact your local Agilent office. The complete list is available at: www.agilent.com/find/contactus Americas Canada Brazil Mexico United States Product specifications and descriptions in this document...

Open the catalog to page 4

All Agilent Technologies - Life Sciences and Chemical catalogs and technical brochures

  1. MS500

    12 Pages

  2. 4200 MP-AES

    12 Pages

  3. Agilent B1507A

    22 Pages

  4. Agilent M9703A

    16 Pages

  5. I/O Hardware

    16 Pages

  6. VEE 9.32

    24 Pages

Archived catalogs