catalogue search
P. 01
P. 02
|
|
You may also be interested in
Actuator, Pneumatic actuator, Assembly machine, Tool changer, Rotary actuator
Text version of the page
|
|
||||||||||||||
|
automation
|
 |
AGS-4 Powered Slide
Built-in Air Cylinder
|
||||||||||||
|
|
||||||||||||||
 |
FEATURES JlND B^ËFITS
• Compact lightweight unit with built-in air cylinder.
• Linear ball bearings ride on precision hardened ground steel shafts.
• Units are permanently lubricated.
• Pistons seals are U-Cup type for long service life.
• Aluminum body and end blocks contain tapped holes and dowel pin holes
for precision mounting or fixturing.
• Custom mounting holes and air ports can be added. Please consult factory.
• Main body or end blocks can be anchored due to the 1/16" height clearance.
• Standard built-in stroke adjustment for precise repetitive operation.
• Proximity switches are available to monitor end of stroke position of the body.
• Optional shock absorbers can be ordered for smooth operation.
• Series AGS is fully field repairable for cost savings and minimum down time. Repair kits are available for repairs or maintenance.
|
|||||||||||||
|
|
||||||||||||||
|
SPEjQFICATIONSI AGS-4
Design: Built-in air cylinder, linear bearings
on steel hardened shafts
|
Payload BAta
|
|||||||||||||
|
Max Tensile T 90 lbs Max Compressive C 90 lbs Max Moment Mx 220 in/lb Max Moment My 220 in/lb Max Moment 220 in/lb
|
[400 N] [400 N] [25 Nm] [25 Nm] [25 Nm]
|
Deflection @ Max load 0.003 Maximum Payload (25 lbs)
Recommended load for smooth operation.
|
||||||||||||
|
Stroke:
|
1 to 4 in
[25.4 mm to 101 mm]
|
|||||||||||||
|
Thrust Force @ 80 PSI [5.5 BAR]
25 lbs [111 N]
Recommended
Speed: 2-14 in/sec
[0.5-.35 m/sec]
|
L
|
|||||||||||||
|
T C
|
m
|
 |
||||||||||||
|
Pressure Range: Low/High
|
20-120 PSi [1.4-8 BAR]
|
Shock Absorbers and Flow are recommended.
|
||||||||||||
|
|
||||||||||||||
|
Temperature Range:
Low/High -207150T [-28Y80°C]
|
h^WIO Order
When ordering, please specify: Design/Model Number and Options.
|
sensor
TYPE*
1 = NPN
2 = PNP
|
shock absorbers
|
|||||||||||
|
Side Play:
|
± 0.001 [.03 mm]
|
|||||||||||||
|
Maximum Payload: 25 lbs
|
[11.3 kg]
|
design/model
AGS-4 AGS-5 AGS-6
|
metric sensor options
1 = LEFT i
2 = RIGHT t
3 = BOTH |
IL
|
|||||||||||
|
Material: High Strength, Aluminum Alloys, Steel Components
|
||||||||||||||
|
Weight:
|
3.5 lbs [1.6 kg]
|
AGS-4
|
|
|||||||||||
|
|
||||||||||||||
|
|
||||||||||||||
|
Piston Diameter:
|
.750 in [19 mm]
|
AGS-4 STROKE (1", 2", 3", 4") AGS-5 STROKE (1", 2", 3", 4", 5") AGS-6 STROKE (1", 2", 3", 4", 5", 6")
|
sensor connector
1 = POTTED
2 = QUICK DISCONNECT
3 = QUICK DISCONNECT WITH RIGHT ANGLE
|
|||||||||||
|
SPEjQFICATIONSI AGS-4-X
Custom Stroke: X= 0 to 4 in [101.6 mm] All Other Specifications: Same As Above
|
||||||||||||||
|
|
||||||||||||||
|
January 2008 - PATENTED Made in the USA
|
* NOTE: Proximity sensors are 8 mm diam., 12-30 VDC, 50 mA and come
with 2 meter cable.
Sensor Part # SNC08, SNQ08, SPC08, SPQ08
|
|||||||||||||
|
|
||||||||||||||
|
18 American Grippers, Inc. 171 Spring Hill Road, Trumbull, Ct 06611 Tel: 203-459-8345 • Fax: 203-452-5943
|
||||||||||||||
|
|
||||||||||||||