AGR-4 Rotary Actuator Low profile, Zero Backlash Optional Rotary Manifold - AGI Automation Components - #1
catalogue search
P. 01
P. 02
P. 03
P. 04
|
|
|
|
You may also be interested in
Double acting actuator, Actuator, Collision sensor, Sensor, Gripper
Text version of the page
| | ||||||||||||||||||||
| automation | AGR-4 Rotary Actuator Low Profile, Zero Backlash, Optional Rotary Manifold | |||||||||||||||||||
| | ||||||||||||||||||||
| features And ^Sfits • Built in adjustable hardstops on output flange stops against a dowel pin imbedded in the body to prevent pinion breakage, and give accurate specific rotation requirements. • Two large bearings, one on either side of the pinion, provides for steady output flange with high loading capacity. • Ultra high torque to weight ratio for faster cycle times. • Compact body design to fit into tight space applications. • Units are permanently lubricated for non-lube air operation, allowing compliance with OSHA regulations. • All rotary units have zero backlash at either end of rotation, this keeps the output flange against the hard stop. • Built in adjustable flow controls allow for maximum cycle times and smooth deceleration. • Proximity switches are available to monitor end of rotation. • The AGR unit is fully repairable for cost savings and minimum down time. | ||||||||||||||||||||
| | ||||||||||||||||||||
| speCfications Design: Rack and Pinion with Flange Hard Stop | loading Formation | Static Dynamic 200 lbs 40 lbs [889 N] [177 N] 1000 lbs 200 lbs [4448 N] [899 N] 500 in/lb 100 in/lb [56.5 Nm] [11.3 Nm] 500 in/lb 100 in/lb [56.5 Nm] [11.3 Nm] | ||||||||||||||||||
| | Max Tensile T Max Compressive C Max Moment Mx Max Moment My | |||||||||||||||||||
| Rotation Range: Payload: | 0°-180° (Adj. +/- 5°) 15 lbs central to axis of rotation [6.8 Kg] | |||||||||||||||||||
| Torque: @80 psi [5.5 BAR] Bearing Load: Dynamic Static Rotation Time: Pressure Range: Low/High | 100 in/lb [11.3 Nm] |
| ||||||||||||||||||
| 1390 lbs [6180 N] 2150 lbs [9560 N] No load .40 second | WARNING! Do not exceed tooling jaw length. | |||||||||||||||||||
| 30-120 PSI [2-8 BAR] | hoWto Order When ordering, please specify: Design/Model Number and Options. | |||||||||||||||||||
| | ||||||||||||||||||||
| Temperature Range: Low/High -20Y180°F [-28Y80°C] | DESIGN/MODEL DEGREE OF AGR-3 ROTATION | SENSOR TYPE* 1 = NPN 2 = PNP | MID- ROTARY STOP MANIFOLD | |||||||||||||||||
| Backlash: Accuracy: | Zero .001 concentric and perpendicular to axis of rotation | |||||||||||||||||||
| AGR-5 A 90° V V ~ ■ -.] -.] -1 | ||||||||||||||||||||
| | ||||||||||||||||||||
| Material: High Strength,Hard Coated Aluminum Alloys, Steel Weight: 5.0 lb [2.3 kg] Piston Diameter: (2x) 1.25 in [32 mm] January 2008 - PATENTED Made in the USA | METRIC SENSOR OPTIONS 1 = CLOSED 2 = OPEN 3 = BOTH * NOTE: Proximity 4mm dia., 5-24 VDC, 22 mA and comes with 2 meter cable. Sensor Part # SPC05, SPQ05, SNC05, SNQ05 | SENSOR CONNECTOR 1 = POTTED 2 = QUICK DISCONNECT 3 = QUICK DISCONNECT WITH RIGHT ANGLE | ||||||||||||||||||
| | ||||||||||||||||||||
| 10 American Grippers, Inc. 171 Spring Hill Road, Trumbull, CT 06611 Tel: 203-459-8345 • Fax: 203-452-5943 info@AGI-Automation.com • www.AGI-Automation.com | ||||||||||||||||||||
| | ||||||||||||||||||||