catalogue search
P. 01
P. 02
|
|
You may also be interested in
Assembly machine, Actuator, Pneumatic actuator, Sensor, Gripper
Text version of the page
| | ||||||||||
| features and bEfits • Built in adjustable hardstops on output flange stops against a dowel pin imbedded in the body to prevent pinion breakage, and give accurate specific rotation requirements. • Two large bearings, one on either side of the pinion, provides for steady output flange with high loading capacity. • Ultra high torque to weight ratio for faster cycle times. • Compact body design to fit into tight space applications. • Units are permanently lubricated for non-lube air operation, allowing compliance with OSHA regulations. • All rotary units have zero backlash at either end of rotation, this keeps the output flange against the hard stop. • Built in adjustable flow controls allow for maximum cycle times and smooth deceleration. • Proximity switches are available to monitor end of rotation. • The AGR unit is fully repairable for cost savings and minimum down time. | ||||||||||
| | ||||||||||
| speCfications Design: Rack and Pinion with Flange Hard Stop | loading Capacity | loading ^formation | ||||||||
| Max Tensile T Max Compressive C Max Moment Mx Max Moment My | Static 50 lbs [222 N] 250 lbs [1110 N] 100 in/lb [11.3 Nm] 100 in/lb [11.3 Nm] | Dynamic 12 lbs [53 N] 50 lbs [222 N] 25 in/lb [2.8 Nm] 25 in/lb [2.8 Nm] | ||||||||
| Rotation Range: Payload: Torque: @80 psi [5.5 BAR] Bearing Load: Dynamic Static Rotation Time: Pressure Range: Low/High Temperature Range: Low/High Backlash: Accuracy: | 0°-180° (Adj. +/- 5°) 1 lb central to axis of rotation [.44 Kg] | |||||||||
| 5 in/lb | [.56 Nm] | |||||||||
| 198 lbs [880 N] 385 lbs [1620 N] No load .1 second 30-120 PSI [2-8 BAR] -20Y180°F [-28Y80°C] Zero .001 concentric and perpendicular to axis of rotation | ||||||||||
| hoWto Order When ordering, please specify: Design/Model Number and Options. | LOOK! More Technical specifications for sensors on "Sensors Accessories" page. | |||||||||
| DESIGN/MODEL AGR-1 AGR-2 | metric | SENSOR TYPE* 1 = NPN 2 = PNP | ||||||||
| Material: High Strength,Hard Coated Aluminum Alloys, Steel Weight: 7 oz [198 g] Piston Diameter: (2x) .5 in [12.7 mm] January 2008 - PATENTED Made in the USA | ||||||||||
| | ||||||||||
| DEGREE OF ROTATION 180° 90° * NOTE: Proximity 4mm dia., 5-24 VDC, 22 mA and comes with 2 meter cable. Sensor Part # SPC05, SPQ05, SNC05, SNQ05 | SENSOR CONNECTOR 1 = POTTED 2 = QUICK DISCONNECT 3 = QUICK DISCONNECT WITH RIGHT ANGLE | |||||||||
| | ||||||||||
| 2 American Grippers, Inc. 171 Spring Hill Road, Trumbull, CT 06611 Tel: 203-459-8345 • Fax: 203-452-5943 info@AGI-Automation.com • www.AGI-Automation.com | ||||||||||
| | ||||||||||