AGP-63 T-Slot Bearing Three Jaw Parallel Gripper - AGI Automation Components - (Version JPG) - PDF Catalogue | Technical Documentation

automation components

AGP-63 Three Jaw Parallel Gripper

T-Slot Bearing Series

features and befits

• Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.

• High gripping force to weight ratio.

• Compact design with long stroke.

• True parallel jaw motion for easy tooling.

• Units are permanently lubricated for non-lube air operation, allowing for compliance with OSHA regulations.

• Hall effect sensors are available to monitor open and closed position of the jaws.

• AGP is fully field repairable for cost savings and minimum down time.

• Multiple mounting surfaces on jaw for easy tooling.

• Optional stripper plate ensures part preload in location upon release.


speciFications
Design: Parallel, Double Acting,
Synchronized Jaws
Stroke:	.62 in	[15.7 mm]
Gripping Force @ 80 PSI [5.5 BAR]
Closing:	200 lbs	[889 N]
Opening:	194 lbs	[862 N]
Time:
Close:	0.22 sec	[0.22 sec]
Open:	0.22 sec	[0.22 sec]
Pressure Range:
Low/High	30-120 PSI [2-8 BAR]
Temperature Range:
Low/High	-20Y180T	[-28Y80°C]
Side Play:	± 0.001	[.03 mm]
Repeatability
from Center:	± 0.002	[.06 mm]
Loading Capacity:
	Static	Dynamic
Max Tensile T	1250 lbs	400 lbs
	[5560 N]	[1780 N]
Max Compressive C	1250 lbs	400 lbs
Max Compressive C	[5560 N]	[1780 N]
Max Moment M_x	1000 in/lb	400 in/lb
Max Moment M_x	[112 Nm]	[45 Nm]
Max Moment M_y	1000 in/lb	400 in/lb
	[112 Nm]	[45 Nm]
Max Moment M_z	1000 in/lb	300 in/lb
Max Moment M_z	[112 Nm]	[33.9 Nm]
Material: High Strength,Hard Coated
aluminum bronze alloys, Steel
Weight:	2.3 lbs	[1 kg]
Piston Diameter:	2.75 in	[69.8 mm]
January 2008 - PATENTED Made in the USA

holding Forces CiApt

loading Information!

300 250



	WARNIN	!
MAX	MUM EFF GER LEN 1	ÌCT1VE GTHS
	*->**

_ 2

0 12 3 4

Finger Length (in)

LOOK! More Technical specifications for sensors on "Sensors Accessories" page.

WARNING! Do not exceed tooling jaw length. See Chart above.

hoWto Order

When ordering, please specify: Design/Model Number and Options.

SENSOR TYPE*

1 = NPN

2 = PNP

DESIGN/MODEL

METRIC

SIZE:

t 1 1

BagpJ - [63 ~|m] -Ei] - [i]

—Tf-^r

23, 43, 63, 83

SENSOR OPTIONS

1 = CLOSED

2 = OPEN

3 = BOTH

SENSOR CONNECTOR

1 = POTTED

2 = QUICK DISCONNECT

3 = QUICK DISCONNECT

WITH RIGHT ANGLE

* NOTE: Hall Effect 4mm dia., 5-24 VDC, 22 mA and comes with 2 meter

cable.

Sensor Part # SHN02, SHNQ4, SHP02, SHPQ4

66 American Grippers, Inc. 171 Spring Hill Road, Trumbull, CT 06611 Tel: 203-459-8345 • Fax: 203-452-5943

info@AGI-Automation.com • www.AGI-Automation.com

AGP-63 T-Slot Bearing Three Jaw Parallel Gripper - AGI Automation Components - #1

Pneumatic actuator, Robot tool changer, Pneumatic vibrator, Assembly machine, Parallel gripper