Catalogue - AGP-375 Double-Guided Wedge Parallel Gripper - AGI Automation Components

Untitled

AGP-375 Parallel Gripper

Double Guided Wedge

automation components

FEATURES AND B^FITS

• Ultra high gripping force to weight ratio.

• True parallel jaw motion for easy tooling.

• Units are permanently lubricated for non-lube air operation, this allowing for compliance with OSHA regulations.

• Additional side mounting holes and side air ports for optional mounting and porting available.

• Proximity switches are available to monitor open and closed position of the jaws.

•Fully field repairable for cost savings and minimum down time.


speCfications
Design: Parallel, Double Acting,
Synchronized Jaws
Stroke:	0.375 in	[9.5 mm]
Gripping Force @ 80	PSI [5.5 bar]:
Closing:	20 lbs	[89 N]
Opening:	22 lbs	[97 N]
Time:
Close:	0.2 sec	[0.2 sec]
Open:	0.2 sec	[0.2 sec]
Pressure Range:	30-120 PSI [2-8 bar]
Temperature Range	-20°-180°F	[-28°-80°C]
Side Play:	± 0.001	[0.03 mm]
Repeatability from center:
	±.002	[0.06 mm]
Loading Capacity:
	Static	Dynamic
Max Tensile T	200 lbs	25 lbs
	[889 N]	[111 N]
Max Compressive C	400 lbs	25 lbs
Max Compressive C	[1780 N]	[111 N]
Max Moment Mx	150 in/lb	25 in/lb
	[17 Nm]	[2.8 Nm]
Max Moment My	150 in/lb	25 in/lb
Max Moment My	[17 Nm]	[2.8 Nm]
Max Moment Mz	150 in/lb	25 in/lb
	[17 Nm]	[2.8 Nm]
Material:	High Strength, Hard
	Coated aluminum
	bronze alloys, Steel
Weight:	7 oz.	[198 g]
Piston Diameter:	1.00 in	[25.4 mm]

HOLDING PORCES ClART

lqAding ^FORMATIOfl

warnng

do not exceed maximum effective finger lengths

lmax

my gf

0.5 1.0 1.5 2.0 2.5

Finger Length (in)

WARNING! Do not exceed tooling jaw length. See Chart above.

gf-

LOOK! More Technical specifications for sensors on "Sensors Accessories" page.

h^WIO Order

When ordering, please specify: Design/Model Number and Options.

SENSOR TYPE*

1 = NPN

2 = PNP

DESIGN/MODEL

AGP-375

METRIC

JL 1

|M] - [jM ~H1

SENSOR OPTIONS

1 = CLOSED

2=OPEN <

3 = BOTH

* NOTE: Proximity sensors are 4 mm dia., 12-30 VDC, 50 mA and comes with 2 meter cable or quick disc.

Sensor Part # SNC04, SPC04

January 2008 - PATENTED Made in the USA

22 American Grippers, Inc. 171 Spring Hill Road, Trumbull, CT 06611 Tel: 203-459-8345 • Fax: 203-452-5943

AGP-375 Double-Guided Wedge Parallel Gripper - AGI Automation Components - #1