Catalogue - AGP-250 Double-Guided Wedge Parallel Gripper - AGI Automation Components

automation

AGP-250 Parallel Gripper

Double Guided Wedge

FEATURES AND BEFITS

• Jaws machined from S7 tool steel to prevent jaw breakage.

• Ultra high gripping force to weight ratio.

• True parallel jaw motion for easy tooling.

• Units are permanently lubricated for non-lube air operation, this allowing for compliance with OSHA regulations.

• Additional side mounting holes and side air ports for optional mounting and porting available.

• Proximity switches are available to monitor open and closed position of the jaws.

• Fully field repairable for cost savings and minimum down time.


speCfications
Design: Parallel, Double Acting,
Synchronized Jaws
Stroke:	0.25 in	[6.3 mm]
Gripping Force @ 80	PSI [5.5 bar]:
Closing:	20 lbs	[89 N]
Opening:	22 lbs	[97 N]
Time:
Close:	0.2 sec	[0.2 sec]
Open:	0.2 sec	[0.2 sec]
Pressure Range:	30-120 PSI [2-8 bar]
Temperature Range	-20°-180°F	[-28°-80°C]
Side Play:	± 0.001	[0.03 mm]
Repeatability from center:
	±.002	[0.06 mm]
Loading Capacity:
	Static	Dynamic
Max Tensile T	100 lbs	15 lbs
	[444 N]	[66.7 N]
Max Compressive C	150 lbs	25 lbs
Max Compressive C	[667 N]	[111 N]
Max Moment Mx	90 in/lb	15 in/lb
	[10 Nm]	[1.7 Nm]
Max Moment My	90 in/lb	15 in/lb
Max Moment My	[10 Nm]	[1.7 Nm]
Max Moment Mz	90 in/lb	15 in/lb
	[10 Nm]	[1.7 Nm]
Material:	High Strength, Hard
	Coated aluminum
	bronze alloys, Steel
Weight:	4 oz.	[113 g]
Piston Diameter:	1.00 in	[25.4 mm]

HOLDING FORCES CHART

LOADflG INFORMATION

WARNING!

DO NOT EXCEED MAXIMUM EFFECTIVE FINGER LENGTHS L-MAX

0.5 1.0 1.5 2.0 2.5 Finger Length (in) WARNING! Do not exceed tooling jaw length. See Chart above.

LOOK! More Technical specifications for sensors on "Sensors Accessories" page.

ho^WIO Order

When ordering, please specify: Design/Model Number and Options.

SENSOR TYPE*

1 = NPN

2 = PNP

DESIGN/MODEL

AGP-250

_______

METRIC

- ■] - , -.

AGP0D

sensor options

1 = CLOSED

2 = OPEN ^_

3 = BOTH

SENSOR CONNECTOR

1 = POTTED

2 = QUICK DISCONNECT

3 = QUICK DISCONNECT

WITH RIGHT ANGLE

* NOTE: Proximity sensors are 4 mm dia., 12-30 VDC, 50 mA and comes with 2 meter cable or quick disc.

Sensor Part # SNC04, SNQ04, SPC04, SPQ04

January 2008 - PATENTED Made in the USA

20 American Grippers, Inc. 171 Spring Hill Road, Trumbull, CT 06611 Tel: 203-459-8345 • Fax: 203-452-5943

info@AGI-Automation.com • www.AGI-Automation.com

AGP-250 Double-Guided Wedge Parallel Gripper - AGI Automation Components - #1